Changes

</gallery>

</gallery>

<gallery mode="packed" heights="1000">

<gallery mode="packed" heights="1400">

Image:Add chain workflow.png|''[[#Main_Menu|Add Chain]]''

Image:Add chain workflow.png|''[[#Main_Menu|Add Chain]]''

Image:Snapshot workflow.png|''[[#Load_.2F_Save_Snapshot|Manage Snapshots]]''

Image:Snapshot workflow.png|''[[#Load_.2F_Save_Snapshot|Manage Snapshots]]''

==Control View==

==Control View==

[[File:Zynthian_ui_instrument_control_01.png|400px|right]]

[[File:Zynthian_ui_instrument_control_01.png|400px|right]]

The Control View shows the controls available for each engine within a chain. It is shown after adding a chain, adding an engine to a chain or by short press SELECT or tapping the bottom legend strip in the mixer view. Your instrument is now enabled and playable and you can modify its parameters.

The Control View shows the controls available for each engine within a chain. It is shown after adding a chain, adding an engine to a chain or by pressing '''short-SELECT''' (or tapping the bottom legend strip in the mixer view). Your instrument is now enabled and playable and you can modify its parameters.

The controls are shown in groups of four (or fewer) on several pages. Each hardware knob controls a parameter displayed in the control view or the control may be dragged up and down on the touchscreen. Controls may toggle between two values, e.g. on / off, lists of values, e.g. sine, square, triangle or continuously adjustable values, e.g. 0%..100%. If there are a lot of possible values the hardware knobs will accelerate progress if rotated fast, e.g. stepping by one value when turned slowly and stepping by 10 values when rotated fast. This allows fine and coarse selection of a parameter from a single knob.

The controls are shown in groups of four (or fewer) on several pages. Each hardware knob controls a parameter displayed in the control view or the control may be dragged up and down on the touchscreen. Controls may toggle between two values, e.g. on / off, lists of values, e.g. sine, square, triangle or continuously adjustable values, e.g. 0%..100%. If there are a lot of possible values the hardware knobs will accelerate progress if rotated fast, e.g. stepping by one value when turned slowly and stepping by 10 values when rotated fast. This allows fine and coarse selection of a parameter from a single knob.

[[File:Zynthian_ui_instrument_control_03.png|400px|right]]

[[File:Zynthian_ui_instrument_control_03.png|400px|right]]

There is a list that shows the pages of controls available.

There is a list that shows the pages of controls available.

To change page, short press SELECT - the list of pages turns grey, rotate SELECT to highlight the required page then short press again to select the page. If there are fewer than three pages then short press SELECT will step through each page. Alternatively, tap the required page on the touchscreen. When a page is selected its controls will be shown. Depending on the configuration, some pages may have fewer than four controls and some engines have no adjustable parameters in which case there will be no control pages.

To change page, press '''short-SELECT''' - the list of pages turns grey, '''rotate SELECT''' to highlight the required page then short press again to select the page. If there are fewer than three pages then '''short-SELECT''' will step through each page. Alternatively, tap the required page on the touchscreen. When a page is selected its controls will be shown. Depending on the configuration, some pages may have fewer than four controls and some engines have no adjustable parameters in which case there will be no control pages.

The pages for the controls for each engine within a chain are shown separated by a title indicating to which engine subsequent pages belong.

The pages for the controls for each engine within a chain are shown separated by a title indicating to which engine subsequent pages belong.

==Chain Options==

==Chain Options==

[[File:Chain options.png|400px|right]]

[[File:Chain options.png|400px|right]]

Bold press SELECT when in the Mixer View or Control View will show the Chain Options menu. Manipulation of the chain is possible:

Pressing '''bold-SELECT''' when in the '''Mixer View''' or '''Control View''' will show the '''Chain Options menu''', allowing to manipulate the chain:

* '''Save Preset''' will allow saving of a engine's configuration as a preset that may later be selected from the preset list. This is only available if the engine supports manipulation of presets. If a chain has several engines then a list of engines will be displayed before naming the preset.

* '''Save Preset''' will allow saving of a engine's configuration as a preset that may later be selected from the preset list. This is only available if the engine supports manipulation of presets. If a chain has several engines then a list of engines will be displayed before naming the preset.

[[File:Zynthian_ui_layer_effect_options.png|400px|right]]

[[File:Zynthian_ui_layer_effect_options.png|400px|right]]

Short press SELECT or tapping on an effect in the list will allow manipulation of the effect:

Select an effect in the list for opening the effect options menu, that allows manipulating chain elements:

* '''Presets''' shows list of available presets for the effect

* '''Presets''' shows list of available presets for the effect

  4    RELOAD_KEY_BINDING        E-1

  4    RELOAD_KEY_BINDING        E-1

  5    LAST_STATE_ACTION          F-1

  5    LAST_STATE_ACTION          F-1

  10    ALL_NOTES_OFF              A#-1

  10    ALL_NOTES_OFF              A#-1

  40    STOP_MIDI_PLAY            E2            Stop: 0xFC

  40    STOP_MIDI_PLAY            E2            Stop: 0xFC

  51    SELECT                    D#3

  51    SELECT                    D#3

  52    SELECT_UP                  E3

  52    SELECT_UP                  E3

  53    SELECT_DOWN                F3

  53    SELECT_DOWN                F3

  56    LAYER_UP                  G#3

  56    LAYER_UP                  G#3

  57    LAYER_DOWN                A3

  57    LAYER_DOWN                A3

  58    SNAPSHOT_UP                A#3

  58    LEARN_UP                  A#3

  59    SNAPSHOT_DOWN              B3

  59    LEARN_DOWN                B3

  64    SWITCH_BACK_SHORT          E4

  64    SWITCH_BACK_SHORT          E4

  60    SWITCH_LAYER_SHORT        C4

  60    SWITCH_LAYER_SHORT        C4

  61    SWITCH_LAYER_BOLD          C#4

  61    SWITCH_LAYER_BOLD          C#4

  59   SWITCH_LAYER_LONG          B3

  68   SWITCH_LAYER_LONG          B3

  71    SWITCH_SNAPSHOT_SHORT      B4

  71    SWITCH_SNAPSHOT_SHORT      B4

  82    SCREEN_BANK                A#5

  82    SCREEN_BANK                A#5

  83    SCREEN_PRESET              B5

  83    SCREEN_PRESET              B5

  90    MODAL_SNAPSHOT_LOAD        F#6

  90    SCREEN_CALIBRATE          F#6

 

  91    MODAL_SNAPSHOT_SAVE        G6

  91    MODAL_SNAPSHOT_SAVE        G6

  92    MODAL_AUDIO_RECORDER      G#6

  92    MODAL_AUDIO_RECORDER      G#6

  100  LAYER_CONTROL              E7

  100  LAYER_CONTROL              E7

[[File:2Oct_Keyboard_CUIA.png|600px|Keyboard]]

[[File:2Oct_Keyboard_CUIA.png|600px|Keyboard]]