2,706
edits
Changes
Jump to navigation
Jump to search
Line 324:
Line 324: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 396:
Line 458: − − − =MIDI-learning= − − MIDI-learning allows you to easily bind specific MIDI events with Zynthian-UI actions. There are 2 types of MIDI events you can learn: − − ====MIDI CC==== − [[File:Zynthian_ui_midi_cc_learn_01.png|400px|right]] − [[File:Zynthian_ui_midi_cc_learn_02.png|400px|right]] − You can map any parameter in the Zynthian UI to a CC knob/slider on your external MIDI controller. I intend to extend this feature to other MIDI messages, but currently only CC messages are supported. Until then, MIDI-filter rules can be used instead. − − Learning a MIDI-CC is quite easy: − − '''1.''' From the control screen, you click the snapshot button. You will be in CC MIDI-learn screen. It’s identical to the Control screen except that all the controllers have a tiny yellow “???” in the bottom. − − '''2.''' Move a zynthian controller. Its tiny “???” will change to green while the other 3 will go back to normal state. − − '''3.''' Finally, move a knob/fader in your MIDI keyboard/controller and the binding is done. The new CC number should appear in the bottom of the learned controller, replacing the tiny "???". − − Of course, MIDI-learning configuration, including CC mappings, is stored and restored with snapshots. − − '''Technical Note:''' MIDI-CC learning works with all the engines. It uses the engine’s native MIDI-learning capabilities when available. Zynthian’s MIDI-filter mappings are used for the rest. To be more explicit, native MIDI-learning is used for MOD-UI and ZynAddSubFX OSC parameters. All the other parameters are managed by Zynthian’s MIDI-filter mapping. − − <br clear=all> − − ====MIDI Program Change==== − [[File:Zynthian_ui_midi_zs3_learn.png|400px|right]] − You can map "SubSnapshots" (ZS3) to MIDI programs. The idea behind this feature is to have a fast preset-change mechanism that can be used on stage. In combination with the “Single Layer” feature, it turns Zynthian in a “Stage-Beast”. You can prepare a snapshot for the full performance, and use ZS3 for fast changing from a song to another, or between parts inside the same song. − − Learning a SubSnapShot is obscenely easy: − − '''1.''' From the control screen, you click the snapshot button '''twice'''. You will see the current list of ZS3s and a message: “Waiting for Program Change…” − − '''2.''' Simply push a “Program Change” button in your keyboard/controller and the ZS3 will be stored in memory, associated with the Program number you send. − − After that, you can recall any stored ZS3 by simply pushing the same PC button again. Of course, the memory-stored zs3s will be saved with your snapshot and restored when loaded again. − − Every zs3 includes: − − - Layer ID − - Bank − - Preset − - Controller values − − As you can see, it has sense in a SnapShot context, where a set of layers are defined. Zs3 changing is very fast, as no engine must be started. − <br clear=all> − − ====MIDI-CC Learning with touch interface==== − − First, you need a working touch interface in your display. If you don't have a touchscreen, you could use a mouse ... − − [[File:Zynthian_ui_midi_learning.png|400px|right]] − '''Learning:''' − 1. In the "Instrument Control" screen, navigate through the parameter screen list to get to the parameter you want to learn. − 2. In the parameter/controller area, slide with your fingernail from '''left to right'''. A green "??" should appear at the bottom. − 3. On your MIDI controller, move the desired knob/slider (or a CC-assigned pad). The green "??" should be replaced by a tiny number, and the parameter should change when you move the knob/slider or push the pad. CC-assigned pads can be very useful for on/off parameters. − <br clear=all> − − [[File:Zynthian_ui_midi_unlearning.png|400px|right]] − '''Unlearning:''' − 1. In the "Instrument Control" screen, navigate through the parameter screen list until you get to the parameter you want to unlearn. − 2. In the parameter/controller area, slide with your fingernail from '''right to left'''. The tiny number, indicating the current CC assignment, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is a hardcoded MIDI-mapped parameter, then the number will change. − <br clear=all>
Zynthian UI User Guide (oldstable-2109) (view source)
Revision as of 10:54, 17 July 2019
, 10:54, 17 July 2019no edit summary
You can change the controller values by "sliding" up/down over the widgets. (see the green arrow in the figure here) This is the same as turning the knob. If you are using a mouse, the mouse wheel also can be used for changing the controller value.
You can change the controller values by "sliding" up/down over the widgets. (see the green arrow in the figure here) This is the same as turning the knob. If you are using a mouse, the mouse wheel also can be used for changing the controller value.
<br clear=all>
=MIDI-learning=
MIDI-learning allows you to easily bind specific MIDI events with Zynthian-UI actions. There are 2 types of MIDI events you can learn:
====MIDI CC====
[[File:Zynthian_ui_midi_cc_learn_01.png|400px|right]]
[[File:Zynthian_ui_midi_cc_learn_02.png|400px|right]]
You can map any parameter in the Zynthian UI to a CC knob/slider on your external MIDI controller. I intend to extend this feature to other MIDI messages, but currently only CC messages are supported. Until then, MIDI-filter rules can be used instead.
Learning a MIDI-CC is quite easy:
'''1.''' From the control screen, you click the snapshot button. You will be in CC MIDI-learn screen. It’s identical to the Control screen except that all the controllers have a tiny yellow “???” in the bottom.
'''2.''' Move a zynthian controller. Its tiny “???” will change to green while the other 3 will go back to normal state.
'''3.''' Finally, move a knob/fader in your MIDI keyboard/controller and the binding is done. The new CC number should appear in the bottom of the learned controller, replacing the tiny "???".
Of course, MIDI-learning configuration, including CC mappings, is stored and restored with snapshots.
'''Technical Note:''' MIDI-CC learning works with all the engines. It uses the engine’s native MIDI-learning capabilities when available. Zynthian’s MIDI-filter mappings are used for the rest. To be more explicit, native MIDI-learning is used for MOD-UI and ZynAddSubFX OSC parameters. All the other parameters are managed by Zynthian’s MIDI-filter mapping.
<br clear=all>
====MIDI Program Change====
[[File:Zynthian_ui_midi_zs3_learn.png|400px|right]]
You can map "SubSnapshots" (ZS3) to MIDI programs. The idea behind this feature is to have a fast preset-change mechanism that can be used on stage. In combination with the “Single Layer” feature, it turns Zynthian in a “Stage-Beast”. You can prepare a snapshot for the full performance, and use ZS3 for fast changing from a song to another, or between parts inside the same song.
Learning a SubSnapShot is obscenely easy:
'''1.''' From the control screen, you click the snapshot button '''twice'''. You will see the current list of ZS3s and a message: “Waiting for Program Change…”
'''2.''' Simply push a “Program Change” button in your keyboard/controller and the ZS3 will be stored in memory, associated with the Program number you send.
After that, you can recall any stored ZS3 by simply pushing the same PC button again. Of course, the memory-stored zs3s will be saved with your snapshot and restored when loaded again.
Every zs3 includes:
- Layer ID
- Bank
- Preset
- Controller values
As you can see, it has sense in a SnapShot context, where a set of layers are defined. Zs3 changing is very fast, as no engine must be started.
<br clear=all>
====MIDI-CC Learning with touch interface====
First, you need a working touch interface in your display. If you don't have a touchscreen, you could use a mouse ...
[[File:Zynthian_ui_midi_learning.png|400px|right]]
'''Learning:'''
1. In the "Instrument Control" screen, navigate through the parameter screen list to get to the parameter you want to learn.
2. In the parameter/controller area, slide with your fingernail from '''left to right'''. A green "??" should appear at the bottom.
3. On your MIDI controller, move the desired knob/slider (or a CC-assigned pad). The green "??" should be replaced by a tiny number, and the parameter should change when you move the knob/slider or push the pad. CC-assigned pads can be very useful for on/off parameters.
<br clear=all>
[[File:Zynthian_ui_midi_unlearning.png|400px|right]]
'''Unlearning:'''
1. In the "Instrument Control" screen, navigate through the parameter screen list until you get to the parameter you want to unlearn.
2. In the parameter/controller area, slide with your fingernail from '''right to left'''. The tiny number, indicating the current CC assignment, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is a hardcoded MIDI-mapped parameter, then the number will change.
<br clear=all>
<br clear=all>
|Right||None||SELECT
|Right||None||SELECT
|}
|}