Changes

==Admin Menu==

==Admin Menu==

[[File:Zynthian_ui_admin.png|400px|right]]

[[File:Zynthian_ui_admin.png|400px|right]]

Pressing the Back knob, when you are in the Layer List screen, brings you to the Admin menu. The last item is how you safely power off the Zynthian without corrupting data files.

Pressing the Back knob, when you are in the Layer List screen, brings you to the Admin menu.  

 

The last item is how you safely power off the Zynthian without corrupting data files.

 

 

<br clear=all>

<br clear=all>

=Global MIDI-learning=

=Global MIDI-learning=

It allows to easily bind any parameter from the Zynthian UI to any CC knob/slider from an external MIDI controller. I intend to extend the feature to other MIDI messages, but currently only CC messages are supported. Anyway, MIDI filter rules can handle these special cases, so it’s not an urgent task.

This allows you to easily connect any parameter in the Zynthian UI to any CC knob/slider on an external MIDI controller. ''(I intend to extend this feature to other MIDI messages, but currently only CC messages are supported.)'' Anyway, MIDI filter rules can handle any special cases, so it’s not an urgent task.

It works with ALL the engines, using the engine’s native MIDI-learning when available (and convenient) or the Zynthian’s MIDI-learning mechanism, based in the MIDI filter. To be more explicit, native MIDI-learning is used for MOD-UI and for ZynAddSubFX OSC parameters. All the MIDI-mapped parameters are managed by the Zynthian’s MIDI-learning mechanism.

This works with ALL the engines, using the engine’s native MIDI-learning capability when available (and convenient) or the Zynthian’s MIDI-learning mechanism, within the MIDI filter. To be more explicit, native MIDI-learning is used for MOD-UI and ZynAddSubFX OSC parameters. All the other MIDI-mapped parameters are managed by the Zynthian’s MIDI-learning mechanism.

You get on-screen feedback during the learning process. When you enable the MIDI-learning for a parameter, a small green text with the string "??" appears on the botton side of the controller/parameter area in the Zynthian UI. When the parameter is bond, the number of the linked CC is shown in the same place.

You get on-screen feedback during the learning process. When you enable MIDI-learning for a parameter, a small green text displaying "??" appears at the bottom of the controller/parameter area in the Zynthian UI. When the parameter is connected to a CC, the number of the assigned CC is shown in the same place.

The MIDI-learning configuration is stored in the snapshot.

The MIDI-learning configuration is stored in the snapshot.

==How it works?==

==How to use MIDI Learning==

First, you need a working touch interface in your display. If not, you could use a mouse ...

First, you need a working touch interface in your display. If you don't have a touchscreen, you could use a mouse ...

[[File:Zynthian_ui_midi_learning.png|400px|right]]

[[File:Zynthian_ui_midi_learning.png|400px|right]]

'''Learning:'''

'''Learning:'''

  1. In the "Instrument Control" screen, navigate the parameter screen list until having the parameter you want to learn.

  1. In the "Instrument Control" screen, navigate through the parameter screen list to get to the parameter you want to learn.

  2. On the parameter/controller area, slide with your nail from '''left to right'''. A green "??" should appear in the bottom side.

  2. In the parameter/controller area, slide with your fingernail from '''left to right'''. A green "??" should appear at the bottom.

  3. In your MIDI controller, move the desired knob/slider (or a CC-assigned pad).  The green "??" should be replaced by a tiny number, and the parameter should change when you move the knob/slider or push the pad. CC-assigned pads can be very useful for "boolean" parameters (i.e. on/off).   

  3. On your MIDI controller, move the desired knob/slider (or a CC-assigned pad).  The green "??" should be replaced by a tiny number, and the parameter should change when you move the knob/slider or push the pad. CC-assigned pads can be very useful for on/off parameters.   

<br clear=all>

<br clear=all>

[[File:Zynthian_ui_midi_unlearning.png|400px|right]]

[[File:Zynthian_ui_midi_unlearning.png|400px|right]]

'''Unlearning:'''

'''Unlearning:'''

  1. In the "Instrument Control" screen, navigate the parameter screen list until having the parameter you want to unlearn.

  1. In the "Instrument Control" screen, navigate through the parameter screen list until you get to the parameter you want to unlearn.

  2. On the parameter/controller area, slide with your nail from '''right to left'''. The tiny number, indicating the current CC bond, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is hardcoded MIDI-mapped parameter, then the number will change.

  2. In the parameter/controller area, slide with your fingernail from '''right to left'''. The tiny number, indicating the current CC assignment, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is a hardcoded MIDI-mapped parameter, then the number will change.

<br clear=all>

<br clear=all>