Changes

There are 4 options in this screen:

There are 4 options in this screen:

* '''New Layer''' => Create a new Layer

* '''New Layer''' => Create a new Layer

 

* '''Remove All Layers''' => Remove all layers, returning to the initial state.

* '''Remove All Layers''' => Remove all layers, returning to the initial state.

* '''All Notes Off''' => All notes are released (note-off) by sending CC#123 to all channels.

 

* '''All Sounds Off''' => All sounds are stopped abruptly by sending CC#120 to all channels.

* '''All Notes Off''' => All notes are released (note-off) by sending CC#123 to all channels.

 

* '''All Sounds Off''' => All sounds are stopped abruptly by sending CC#120 to all channels.

The 2 last options (All Notes/Sounds Off) can be triggered by short-clicking CTRL-1 (layer) from the layer screen (contextual actions). In such a way you can trigger the actions from any point in the workflow by simply clicking twice CTRL-1.

The 2 last options (All Notes/Sounds Off) can be triggered by short-clicking CTRL-1 (layer) from the layer screen (contextual actions). In such a way you can trigger the actions from any point in the workflow by simply clicking twice CTRL-1.

[[File:Zynthian_ui_layer_list.png|400px|right]]

[[File:Zynthian_ui_layer_list.png|400px|right]]

You can create up to 16 layers. Several layers can be assigned to the same MIDI Channel, but when you do so, these layers are MIDI-bond because it receive the same MIDI messages. This can be a problem when trying to adjust volume (CC#7) or other parameters assigned to standard MIDI CCs. There are plans to make layers receive separated MIDI data-flows, but it's not implemented yet.

You can create up to 16 layers. Several layers can be assigned to the same MIDI Channel, but when you do so, these layers are MIDI-bond because it receive the same MIDI messages. This can be a problem when trying to adjust volume (CC#7) or other parameters assigned to standard MIDI CCs. There are plans to make layers receive separated MIDI data-flows, but it's not implemented yet.

<br clear=all>

<br clear=all>

If you bold-press the select switch, the "Layer Options" menu will be opened for the selected layer. This menu allows to:

If you bold-press the select switch, the "Layer Options" menu will be opened for the selected layer. This menu allows to:

* '''MIDI chan''' => change the assigned MIDI Channel

* '''MIDI chan''' => change the assigned MIDI Channel

 

* '''Transpose''' => transpose the layer up and down, by semitones.

* '''Transpose''' => transpose the layer up and down, by semitones.

* '''Audio => MOD-UI''' => route ''the layer's engine audio output'' to MOD-UI audio input, allowing post-processing the audio with it

 

* '''Remove Layer''' => Remove the layer

* '''Audio => MOD-UI''' => route ''the layer's engine audio output'' to MOD-UI audio input, allowing post-processing the audio with it

 

* '''Remove Layer''' => Remove the layer

<br clear=all>

<br clear=all>

[[File:Zynthian_ui_instrument_control_01.png|400px|right]]

[[File:Zynthian_ui_instrument_control_01.png|400px|right]]

This screen is shown after you have chosen a preset. Your instrument is now playable and you can modify the parameters.

This screen is shown after you have chosen a preset. Your instrument is now playable and you can modify the parameters.

<br clear=all>

<br clear=all>

[[File:Zynthian_ui_instrument_control_02.png|400px|right]]

[[File:Zynthian_ui_instrument_control_02.png|400px|right]]

 

The central list shows the different pages of parameters. You can navigate the page of parameters by clicking short-select to step one page.

Turning each of the 4 knobs change the values of the synth parameters displayed in the squares at the sides of the screen. The list in the center of the screen allows you to choose the page of parameters. You can step one page by clicking select.

<br clear=all>

<br clear=all>