Changes

From the instrument control screen, if you bold-press two knobs at once, you should enter the XY-select mode.

From the instrument control screen, if you bold-press two knobs at once, you should enter the XY-select mode.

The 2 controllers you pushed will be green, indicating they are pre-selected for XY-control. You can change the pre-selection by rotating any knob, navigating through the controller pages if needed.

The 2 controllers you pushed will be green, indicating they are pre-selected for XY-control. You can change the pre-selection by rotating any knob. (The knob must be rotated through several values before it will be detected.) Use the ''select'' switch to navigate through the controller pages to select different controllers if needed.

<br clear=all>

<br clear=all>

Learning to create a SubSnapShot is obscenely easy:

Learning to create a SubSnapShot is obscenely easy:

'''1.''' From the Control screen, bold click the snapshot button to enter MIDI control learn mode then short click the snapshot button. You will see the current list of ZS3s (initially empty) and a message: “Waiting for Program Change…”

 

'''1.''' From the Control screen, short click the snapshot button to enter MIDI control learn mode then short click the snapshot button. You will see the current list of ZS3s (initially empty) and a message: “Waiting for Program Change…”

'''2.''' Push a “Program Change” button in your keyboard/controller and the ZS3 will be stored in memory, associated with the Program Number you pushed on your keyboard/controller.

'''2.''' Push a “Program Change” button in your keyboard/controller and the ZS3 will be stored in memory, associated with the Program Number you pushed on your keyboard/controller.