334
edits
Changes
Jump to navigation
Jump to search
Line 792:
Line 792: + + + + + + + + + + + + + + + + + + + + + + + + + +
Zynthian UI User Guide (oldstable-2109) (view source)
Revision as of 08:29, 5 January 2021
, 08:29, 5 January 2021no edit summary
You can access this menu from the Main menu.
You can access this menu from the Main menu.
<br clear=all>
===Touchscreen Calibration===
Zynthian supports touchscreen operation for most operations. To ensure good alignment of the touch interface there is a calibration screen that is accessed from the Admin menu.
[[File:Touchscreen_calibration_1.png|200px|right]]
When the screen opens it shows a target crosshair in the center of the screen and a countdown timer. If the timer expires the screen will close without applying any calibration. Touch the target to detect the screen and begin calibration.
<br clear=all>
[[File:Touchscreen_calibration_2.png|200px|right]]
The name of the detected display is shown at the bottom of the screen. Further targets will appear. Touch the screen, drag to centre of target and release.
When the screen is pressed the target will show red. When released the measurement is taken and the next crosshair target appears white.
<br clear=all>
[[File:Touchscreen_calibration_3.png|200px|right]]
After releasing the last target, calibration is applied and the screen closes. Touch is ignored if too close to previous touch.
Use BACK button or wait for timeout to cancel calibration. Timer is reset to 15s when screen is touched and paused until released. The purpose of the timeout is to avoid users of Zynthians without back button being stuck in calibration screen view.
<br clear=all>
<br clear=all>