Changes

Although the '''MIXER''' is shown in the layer list, it's not a real layer. This pseudo-layer allows to adjust the soundcard output/input levels and other audio-hardware related options. Technically speaking, it's a user interface for the ALSA (Audio Linux Sound Architecture) mixer.

Although the '''MIXER''' is shown in the layer list, it's not a real layer. This pseudo-layer allows to adjust the soundcard output/input levels and other audio-hardware related options. Technically speaking, it's a user interface for the ALSA (Audio Linux Sound Architecture) mixer.

You can configure the available mixer controllers from the webconf audio config menu.

You can configure the mixer controllers from the webconf's hardware->audio menu. Simply click the '''+''' button on the "Mixer Controls" text area.  

<br clear=all>

<br clear=all>

     - Controller values

     - Controller values

As you can see, it has sense in a SnapShot context, where a set of layers are defined. Zs3 changing is very fast, as no engine must be started.

As you can see, it has sense in a SnapShot context, where a set of layers are defined. Zs3 changing is very fast, as no engine have to be started.

<br clear=all>

<br clear=all>

====MIDI-CC Learning with touch interface====

====MIDI-CC Learning with a touch interface====

First, you need a working touch interface in your display. If you don't have a touchscreen, you could use a mouse ...

First, you need a working touch interface in your display. If you don't have a touchscreen, you could use a mouse.

[[File:Zynthian_ui_midi_learning.png|400px|right]]

[[File:Zynthian_ui_midi_learning.png|400px|right]]

'''Unlearning:'''

'''Unlearning:'''

  1. In the "Instrument Control" screen, navigate through the parameter screen list until you get to the parameter you want to unlearn.

  1. In the "Instrument Control" screen, navigate through the parameter screen list until you get to the parameter you want to unlearn.

  2. In the parameter/controller area, slide with your fingernail from '''right to left'''. The tiny number, indicating the current CC assignment, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is a hardcoded MIDI-mapped parameter, then the number will change.

  2. In the parameter/controller area, slide with your fingernail from '''right to left'''. The tiny number, indicating the current CC assignment, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is a hardcoded MIDI-mapped parameter, the number will change.

<br clear=all>

<br clear=all>

  0x00  (Velocity/parameter)

  0x00  (Velocity/parameter)

or play the C-1 key, if your keyboard has it ;-)

or play the C-1 key, if your keyboard has it.

This is the full list:

This is the full list: