Changes

Jump to navigation Jump to search
Line 8: Line 8:  
The encoders/switch knobs are used to navigate between the different screens/menus, select options and change the instrument parameters, acting as MIDI/OSC controllers.
 
The encoders/switch knobs are used to navigate between the different screens/menus, select options and change the instrument parameters, acting as MIDI/OSC controllers.
   −
Currently there are two screen types (layouts):
+
Currently there are two main screen types (layouts):
    
# '''Selector Screen''': a list of items that you can scroll and select with the SELECT (4) knob
 
# '''Selector Screen''': a list of items that you can scroll and select with the SELECT (4) knob
 
# '''Controller Screen''': In the corners, 4 control widgets (one for each knob), with label and value indicator (graphic and numeric). In the middle, a list of controller maps which you can use to change or rotate using the SELECT (4) knob.
 
# '''Controller Screen''': In the corners, 4 control widgets (one for each knob), with label and value indicator (graphic and numeric). In the middle, a list of controller maps which you can use to change or rotate using the SELECT (4) knob.
   −
And there are 3 types of clicks (push) that can be performed, depending on how long you hold down the knob:
+
Almost every Zynthian UI screen fits in one of these 2 types, however, other screen types does exist:
 +
 
 +
* '''XY Controller Screen''': It allows to modify 2 parameters at once using the touch interface.
 +
* '''Info''': It display info about some operation, like "Update Software", or "Network Info"
 +
* '''Sequencer''': It's a planned feature not implemented yet ;-)
 +
 
 +
There are 3 types of clicks (push) that can be performed, depending on how long you hold down the knob:
 +
 
 
* '''short:''' less than 0.3 seconds
 
* '''short:''' less than 0.3 seconds
 
* '''bold:''' between 0.3 and 2 seconds
 
* '''bold:''' between 0.3 and 2 seconds

Navigation menu