Line 109: |
Line 109: |
| First, you need a working touch interface in your display. If not, you could use a mouse ... | | First, you need a working touch interface in your display. If not, you could use a mouse ... |
| | | |
| + | [[File:Zynthian_ui_midi_learning.png|400px|right]] |
| '''Learning:''' | | '''Learning:''' |
| 1. In the "Instrument Control" screen, navigate the parameter screen list until having the parameter you want to learn. | | 1. In the "Instrument Control" screen, navigate the parameter screen list until having the parameter you want to learn. |
| 2. On the parameter/controller area, slide with your nail from '''left to right'''. A green "??" should appear in the bottom side. | | 2. On the parameter/controller area, slide with your nail from '''left to right'''. A green "??" should appear in the bottom side. |
| 3. In your MIDI controller, move the desired knob/slider (or a CC-assigned pad). The green "??" should be replaced by a tiny number, and the parameter should change when you move the knob/slider or push the pad. CC-assigned pads can be very useful for "boolean" parameters (i.e. on/off). | | 3. In your MIDI controller, move the desired knob/slider (or a CC-assigned pad). The green "??" should be replaced by a tiny number, and the parameter should change when you move the knob/slider or push the pad. CC-assigned pads can be very useful for "boolean" parameters (i.e. on/off). |
| + | <br clear=all> |
| | | |
| + | [[File:Zynthian_ui_midi_unlearning.png|400px|right]] |
| '''Unlearning:''' | | '''Unlearning:''' |
| 1. In the "Instrument Control" screen, navigate the parameter screen list until having the parameter you want to unlearn. | | 1. In the "Instrument Control" screen, navigate the parameter screen list until having the parameter you want to unlearn. |
| 2. On the parameter/controller area, slide with your nail from '''right to left'''. The tiny number, indicating the current CC bond, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is hardcoded MIDI-mapped parameter, then the number will change. | | 2. On the parameter/controller area, slide with your nail from '''right to left'''. The tiny number, indicating the current CC bond, should disappear or change. If the parameter is an engine-specific controlled engine, the number will disappear. If the parameter is hardcoded MIDI-mapped parameter, then the number will change. |
| + | <br clear=all> |