Changes

After downloading the SD-image, you have to write it to a SDcard. You need a minimum size of 16GB SDcard for the full ''Gorgona'' image or 8GB for the ''Gorgonilla'' lite image.  

After downloading the SD-image, you have to write it to a SDcard. You need a minimum size of 16GB SDcard for the full ''Gorgona'' image or 8GB for the ''Gorgonilla'' lite image.  

Use '''Etcher''' https://etcher.io/ (free software works on Mac, Windows or Linux) to write the image onto the SDcard.

Use '''Etcher''' https://etcher.io/ (free software works on Mac, Windows or Linux) to write the image onto the SDcard. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].

Finally, if you like, you can build your own SD image following these instructions:

 

If you prefer, you can build your own SD image following these instructions:

  [https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script]

  [https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script]