'''[https://os.zynthian.org/zynthianos-last-stable.zip Last Stable ZynthianOS]''' ([https://os.zynthian.org/zynthianos-last-stable.zip.md5 MD5-sum])
'''[https://os.zynthian.org/zynthianos-last-stable.zip Last Stable ZynthianOS]''' ([https://os.zynthian.org/zynthianos-last-stable.zip.md5 MD5-sum])
+
+
== Unzipping ==
+
You will need to unzip this file to provide an .img file that can be 'burnt' to an SSD disk that is bootable in the zynthian machine.
+
This process differs depending on the Operating system you use for Internet access.
+
+
[[File:Imager.png|thumb]]
+
A raspberry Pi desktop instance will unzip and burn the Imager application to write the SSD...
+
[[File:Usbssdwriter.jpg|thumb]]
+
You will require a SSD Writer, but this task can be completed with only the raspberry Pi you are using for the zynthian with a little ssd disk swapping.
+
<br>
+
+
== Instructions ==
{{NoteBox|This SD-image is pre-configured for '''official kits v4 & v3'''. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware.
{{NoteBox|This SD-image is pre-configured for '''official kits v4 & v3'''. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware.
−
==== Instructions ====
+
* For accessing to the webconf tool, [[Accessing_Zynthian_from_your_computer#Accessing_the_Web_Configuration_Tool|see here]]
* For accessing to the webconf tool, [[Accessing_Zynthian_from_your_computer#Accessing_the_Web_Configuration_Tool|see here]]