Line 5: |
Line 5: |
| '''[https://os.zynthian.org/zynthianos-last-stable.zip Last Stable ZynthianOS]''' ([https://os.zynthian.org/zynthianos-last-stable.zip.md5 MD5-sum]) | | '''[https://os.zynthian.org/zynthianos-last-stable.zip Last Stable ZynthianOS]''' ([https://os.zynthian.org/zynthianos-last-stable.zip.md5 MD5-sum]) |
| | | |
− | {{NoteBox|This SD-image is pre-configured for '''official kits v4 & v3'''. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware.}}
| + | == Unzipping == |
| + | You will need to unzip this file to provide an .img file that can be 'burnt' to an SSD disk that is bootable in the zynthian machine. |
| + | This process differs depending on the Operating system you use for Internet access. |
| | | |
| + | [[File:Imager.png|thumb]] |
| + | A raspberry Pi desktop instance will unzip and burn the Imager application to write the SSD... |
| + | [[File:Usbssdwriter.jpg|thumb]] |
| + | You will require a SSD Writer, but this task can be completed with only the raspberry Pi you are using for the zynthian with a little ssd disk swapping. |
| + | <br> |
| + | |
| + | == Instructions == |
| + | |
| + | {{NoteBox|This SD-image is pre-configured for '''official kits v4 & v3'''. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware. |
| + | |
| + | |
| + | |
| + | |
| + | * For accessing to the webconf tool, [[Accessing_Zynthian_from_your_computer#Accessing_the_Web_Configuration_Tool|see here]] |
| + | * Once logged in go to Hardware -> Kit and select "Custom" then click on save button |
| + | * Then, stil in the Hardware menu, configure each device: Audio, Display, Wiring (use "Dummies" if you do not use any encoder/switch). Don't forget to save your configuration after each step. |
| + | * When everything is configured, you can reboot Zynthian using the System -> Reboot menu item |
| + | }} |
| + | |
| + | <!-- |
| == Nightly Build SD-Images == | | == Nightly Build SD-Images == |
| | | |
Line 18: |
Line 40: |
| | | |
| '''@guysoft has largely contributed to the project by configuring and setting up the ZynthianOS build server. Really big thanks!!''' | | '''@guysoft has largely contributed to the project by configuring and setting up the ZynthianOS build server. Really big thanks!!''' |
| + | --> |
| | | |
| == Preparing the SD-card == | | == Preparing the SD-card == |