Line 1: |
Line 1: |
− | == Official Buster SD-Images == | + | == Official ZynthianOS SD-Images == |
| | | |
| This is the last official Zynthian SD-Image, based on Raspberry Pi OS: | | This is the last official Zynthian SD-Image, based on Raspberry Pi OS: |
Line 5: |
Line 5: |
| '''[https://os.zynthian.org/zynthianos-last-stable.zip Last Stable ZynthianOS]''' ([https://os.zynthian.org/zynthianos-last-stable.zip.md5 MD5-sum]) | | '''[https://os.zynthian.org/zynthianos-last-stable.zip Last Stable ZynthianOS]''' ([https://os.zynthian.org/zynthianos-last-stable.zip.md5 MD5-sum]) |
| | | |
− | {{NoteBox|Last SD images are pre-configured for '''official kits v4 & v3'''. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware.}} | + | {{NoteBox|This SD-image is pre-configured for '''official kits v4 & v3'''. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware. |
| | | |
| + | |
| + | ==== Instructions ==== |
| + | |
| + | * For accessing to the webconf tool, [[Accessing_Zynthian_from_your_computer#Accessing_the_Web_Configuration_Tool|see here]] |
| + | * Once logged in go to Hardware -> Kit and select "Custom" then click on save button |
| + | * Then, stil in the Hardware menu, configure each device: Audio, Display, Wiring (use "Dummies" if you do not use any encoder/switch). Don't forget to save your configuration after each step. |
| + | * When everything is configured, you can reboot Zynthian using the System -> Reboot menu item |
| + | }} |
| + | |
| + | <!-- |
| == Nightly Build SD-Images == | | == Nightly Build SD-Images == |
| | | |
Line 18: |
Line 28: |
| | | |
| '''@guysoft has largely contributed to the project by configuring and setting up the ZynthianOS build server. Really big thanks!!''' | | '''@guysoft has largely contributed to the project by configuring and setting up the ZynthianOS build server. Really big thanks!!''' |
| + | --> |
| | | |
| == Preparing the SD-card == | | == Preparing the SD-card == |