2,705
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
Please, add your questions to this FAQ. And of course, if you can add/improve and answer, do it! ;-)
Please, add your questions to this FAQ. And of course, if you can add/improve an answer, do it! ;-)
----------------------------------
===Where can i buy a Zynthian Kit?===
Currently you can buy the official Zynthian kits in the [http://shop.zynthian.org Zynthian Shop].
=== I just wrote my 16/32/64 GB SD card with a Zynthian image, but from Zynthian's console i only see a part of SD's total space and i've no free space left in the partition. How can i make available all the space on my SD Card? ===
After writing the Zynthian image in the SD card, you have to "expand" the partition to fill all the available space.
Procedure:
+ login into Zynthian by SSH
+ execute "df" command to see the size of your partition and the available space
+ run "sudo raspi-config" and select the first option to expand your partition
+ reboot Zynthian
+ login again and execute "df" command to see size of your partition and the available space
You should see the difference ;-)
'''Important:''' If you don't expand your partition, you will have problems when updating zynthian software or library, as you will run out of space.
'''UPDATE: From 2016-12-23, the Gorgona SD image solve this problem. Now, in the first boot, the partition size will be auto-expanded.'''
=== Can i play a MIDI track with Zynthian as a multi instrument expander (different instruments on different channels)? If I have such a setup: how can I store it? ===
You can create such a setup by using the channel list and configuring different presets on each channel. This will work with the next Synth Engines:
+ ZynAddSubFX
+ LinuxSampler
+ FluidSynth
setBfree tries to emulate the original Hammond B3 configuration. It has a fixed setup of 2 manuals (upper and lower) and pedals, arranged in channels 1, 2 and 3.
While using MOD-UI, the channel list doesn't appears, but you can setup a MIDI splitter/router inside Carla and configure different plugins/effects in each channel or create more complex setups. No limits (well, CPU ;-).
Remember that currently you can only work with one engine at a time, but using MOD-UI you can load all the engines as plugins, so you create complex multi-engine setups.
=== I try to put some GIG files inside the '''zynthian-my-data/soundfonts''' folder, but Zynthian GUI don't show my files. What am i doing wrong? ===
The files dropped directly inside "gig" directory wont be shown. You must create some subfolder (category) inside the gig folder. The same is true for SFZs soundfonts.
=== How do I edit entries in the wiki? ===
You need to be able to login to the wiki with a username:
Simply register . .