393
edits
Changes
Jump to navigation
Jump to search
mLine 38:
Line 38: − Anyway, when you configure the bluetooth device and get it working with Zynthian, i suspect that latency will be too big for playing/sequencing in real-time. A wireless device like this normally need a big buffer to avoid “cuts”. In my very first tests I used a BT speaker “just for fun”. Latency was a little less than 1 second, more than enough to make it unplayable+
Configuring Audio Devices (view source)
Revision as of 23:14, 10 November 2017
, 23:14, 10 November 2017no edit summary
A “Bluetooth speaker” is an audio device in its own. In order to get this device working with Zynthian you need to configure it with Jack Audio. See the “audio config” tab in the webconf tool.
A “Bluetooth speaker” is an audio device in its own. In order to get this device working with Zynthian you need to configure it with Jack Audio. See the “audio config” tab in the webconf tool.
However, if you configure the bluetooth device and get it working with Zynthian, I suspect that the latency will be too long for playing/sequencing in real-time. A wireless device like this normally needs a big buffer to avoid “cuts”. In my very first tests I used a BT speaker “just for fun”. Latency was a little less than 1 second, more than enough to make it completley unplayable.