334
edits
Changes
Jump to navigation
Jump to search
mLine 344:
Line 344: − +
Building a Zynthian Box using an official Kit v4.1 (view source)
Revision as of 15:51, 17 December 2020
, 15:51, 17 December 2020→First Boot
When you are sure that everything is in its place, it's time to boot the machine:
When you are sure that everything is in its place, it's time to boot the machine:
1. Insert the SD-card with the zynthian image. If you don't have one yet, [[#Zynthian_Software|read this]]. You can insert the SD-card through the "window" on the bottom-side of the case.
1. Insert the SD-card with the zynthian image. If you don't have one yet, [[#Zynthian_Software|read this]]. You can insert the SD-card through the "window" on the bottom-side of the case. The SD-card is inserted with the (gold) pins facing the top of the case and the manufacturer's print facing the bottom of the case.
2. Plug the mini-usb power connector. A good 5V micro-usb charger is recommended (> 2 Amp).
2. Plug the mini-usb power connector. A good 5V micro-usb charger is recommended (> 2 Amp).