2,706
edits
Changes
Jump to navigation
Jump to search
Line 126:
Line 126: − +
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 20:08, 28 July 2020
, 20:08, 28 July 2020→Secure the balanced audio input jack-TRS connectors
These are 2 separated connectors with a 3-wire harness each, ended with 3 x 1-pin dupont connectors.
These are 2 separated connectors with a 3-wire harness each, ended with 3 x 1-pin dupont connectors.
Insert the jack connectors into the holes labeled as ''audio IN''. You have to insert them from inside the box and secure them with the washers and nuts from the outside. The washers will keep the nut from damaging the case. Use a wrench for tightening the nuts, but not too much!
Insert the jack connectors into the 2 holes labeled as ''audio IN''. You have to insert them from inside the box and secure them with the washers and nuts from the outside. The washers will keep the nut from damaging the case. Use a wrench for tightening the nuts, but not too much!