2,718
edits
Changes
Jump to navigation
Jump to search
Line 98:
Line 98: − + − + −
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 19:51, 28 July 2020
, 19:51, 28 July 2020→Prerequisites
===Prerequisites===
===Prerequisites===
Assembling your Zynthian Kit V4 is not difficult at all: you need your attention, a screwdriver, and an adjustable wrench. You don't need to solder anything, just put it together and connect the wires.
Assembling your Zynthian Kit V4 is not difficult at all: you need all your attention, a screwdriver, an adjustable wrench, a cutter and adhesive tape. You don't need to solder anything, just put it together and connect the wires.
Read the instructions and observe the detailed photos carefully. If you get in trouble you can ask the community:
'''Read the instructions and observe the detailed photos carefully'''. Both!! If you get in trouble you can ask the community:
https://discourse.zynthian.org
https://discourse.zynthian.org
{{WarningBox|Please, handle electronic parts with care, specially the display, as they are easily damaged.}}
{{WarningBox|Please, handle electronic parts with care, specially the display, as they are easily damaged.}}
===Secure the unbalanced audio output jack-TS connectors===
===Secure the unbalanced audio output jack-TS connectors===