2,718
edits
Changes
Jump to navigation
Jump to search
Line 201:
Line 201: + + +
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 14:22, 28 July 2020
, 14:22, 28 July 2020→Mount the Display
The zynaptik board has some extra circuitry which doesn't have anything soldered on it. These are used for adding extra functionality to the board.
The zynaptik board has some extra circuitry which doesn't have anything soldered on it. These are used for adding extra functionality to the board.
===Mount the Display===
===Mount the Display===
{{WarningBox|Please, handle electronic parts with care, specially the display, as it is easily damaged.}}
{{WarningBox|Please, handle electronic parts with care, specially the display, as it is easily damaged.}}
The screen is secured with these 4 screws, nuts, and nylon separators. Mount the screen by screwing the screws from the outside and fixing them with the bolts from the inside. The separators go between the screen and the case. Remember to remove the protective film from the screen before mounting it.
The screen is secured with these 4 screws, nuts, and nylon separators. Mount the screen by screwing the screws from the outside and fixing them with the bolts from the inside. The separators go between the screen and the case. Remember to remove the protective film from the screen before mounting it.