2,706
edits
Changes
Jump to navigation
Jump to search
Line 255:
Line 255: − − ====HifiBerry DAC+ADC Standard==== − − Connect the input jack connector to the audio-input header on the sound card using the 3-pin Dupont connector: − − [[File:dacplus-adc-top audio-in.jpg|600px]] − [[File:IMG_2416.JPG|600px]] − − The black wire should be connected to pin 3, red wire to pin 2 and white wire to pin 1. Looking at the first photo, numbering is left to right. − − {{NoteBox|Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.}} − − − {{WarningBox|Due to hardware problems, Hifiberry has recently changed (September 2019) [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc the specification of the DAC+ADC]. It seems that the Balanced Audio input doesn't work as expected. Instead it works like a simple not-balanced input. You can read more about this subject on [https://discourse.zynthian.org/t/new-official-kit-v2-audio-input-is-here/3013/25 this forum thread]. − <br> − In order to take advantage of the stereo connector, which should be a mono balanced input but isn't, you can get an unbalanced stereo input by connecting both audio channels to the connector. The problem is that the 3-wire Dupont connector included in official kit. You have to cut the second wire (red or white) and solder a single Dupont connector, connecting it to the pin 5 on the Hifiberry. Please check the [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc/ Hifiberry DAC+ADC specification]}}
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 22:42, 27 July 2020
, 22:42, 27 July 2020→Connect the Audio Input Jack connector
This step depends of the specific model of your soundcard:
This step depends of the specific model of your soundcard:
====HifiBerry DAC+ADC PRO====
====HifiBerry DAC+ADC PRO====