2,705
edits
Changes
Jump to navigation
Jump to search
Line 147:
Line 147: − + Line 166:
Line 166: −
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 11:23, 8 August 2020
, 11:23, 8 August 2020→Mount the MIDI activity LEDS
===Mount the MIDI activity LEDS===
===Mount the MIDI activity LEDS===
Insert the 3 LEDS in the case from the inside, leaving the short lead at left. Make sure you push the LEDs by the plastic around the LED, not the LED itself.
Insert the 3 LEDS in the case from the outside, leaving the short lead at left. Make sure you push the LEDs by the plastic around the LED, not the LED itself.
{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short the JP1 & JP2 jumpers on the zynaptik board.}}
{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short the JP1 & JP2 jumpers on the zynaptik board.}}
===Prepare the Zynductor Passive Cooler===
===Prepare the Zynductor Passive Cooler===