2,718
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + + + Line 17:
Line 19: − + − + Line 46:
Line 48: − + Line 160:
Line 162: − + Line 251:
Line 253: − − '''Don't mount the controllers like in the photo''', do it upside-down to avoid pressing the MIDI LED pins. I will update the photo ASAP. Line 282:
Line 282: − +
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 19:32, 13 August 2021
, 19:32, 13 August 2021→Introduction
[http://shop.zynthian.org Zynthian Shop]
[http://shop.zynthian.org Zynthian Shop]
Specifically, these instructions are for assembling the Zynthian Kit v4, that includes the Zynaptik circuit and the ZynScreen v1.5 display.
Specifically, these instructions are for assembling the Zynthian Kit v4.0. that includes the Hifiberry DAC+ADC PRO with the Zynaptik circuit and the ZynScreen v1.5 display.
[[File:IMG_3148_OK_1024.JPG|500px]][[File:IMG_3145_OK_1024.JPG|500px]]
[[File:IMG_3148_OK_1024.JPG|500px]][[File:IMG_3145_OK_1024.JPG|500px]]
{{WarningBox|If you have a newer kit 4.X with X>0, [[Zynthian_Box_Building |you should choose the right tutorial for your kit!]]}}
=List of Materials=
=List of Materials=
** [https://shop.zynthian.org/shop/product/zynthian-controllers-v4-328?category=16 4 x controllers v4]
** [https://shop.zynthian.org/shop/product/zynthian-controllers-v4-328?category=16 4 x controllers v4]
** [https://shop.zynthian.org/shop/product/zynaptik-module-330?category=16 Zynaptic module] (MIDI IN/THRU/OUT & extended I/O)
** [https://shop.zynthian.org/shop/product/zynaptik-module-330?category=16 Zynaptic module] (MIDI IN/THRU/OUT & extended I/O)
** Aluminum Case v4 (including zynductor passive cooling, bolts & nuts)
** [https://shop.zynthian.org/shop/product/aluminum-case-kit-v4-1-333?category=16 Aluminum Case v4] (including zynductor passive cooling, bolts & nuts)
** [https://shop.zynthian.org/shop/product/zynthian-case-connectors-kit-v4-363?category=16 Pre-built case-connectors] (with soldered harnesses)
** [https://shop.zynthian.org/shop/product/zynthian-case-connectors-kit-v4-363?category=16 Pre-built case-connectors] (with soldered harnesses)
** [https://shop.zynthian.org/shop/product/zynthian-ribbon-bus-cable-278?category=16 Ribbon bus cable]
** [https://shop.zynthian.org/shop/product/zynthian-ribbon-bus-cable-278?category=16 Ribbon bus cable]
* Power supply for RBPi 4 (5.1v 3A with USB type-C connector) => Not included on official kits!
** [https://shop.zynthian.org/shop/product/raspberry-pi-15-3w-usb-c-power-supply-389?category=16 Power supply for RBPi 4] (5V 3A USB type-C connector) => Optional
* 16GB micro-SD card or bigger (Use a high-quality card) => Not included on official kits!
* 16GB micro-SD card or bigger (Use a high-quality card) => Not included on official kits!
The easiest way of getting the software is downloading the last ''official'' SD image from here:
The easiest way of getting the software is downloading the last ''official'' SD image from here:
'''[https://os.zynthian.org/2020-05-27-zynthianos-buster-lite-1.0.0-RC2.zip Download Zynthian "Buster RC-2" SD-image]'''
'''[https://os.zynthian.org/zynthianos-last-stable.zip Download Last Stable ZynthianOS SD-image]'''
It's a compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3. The SD-card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
It's a compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3. The SD-card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
* JST Yellow wire (2) => LED's Cathode (LED's short lead)
* JST Yellow wire (2) => LED's Cathode (LED's short lead)
Since the LED's leads are too long, you will want to cut them down to about 7-8mm. Make sure you remember which lead is the short one. If you feel the dupont connector doesn't grab the pins enough, you should press the tiny metal-jacket inside the plastic capsule to make it narrow. It's easy, simply put the dupont connector over the desk and press the metal with the screwdriver tip or something like that.
Since the LED's leads are too long, you will want to cut them down to about 7-8mm. Make sure you remember which lead is the short one. When inserting the dupont connector, if you feel that it doesn't grab the pins enough, you should press the tiny metal-jacket inside the plastic capsule to make it narrow. It's easy, simply put the dupont connector over the desk and press the metal with the screwdriver tip or something like that.
[[File:IMG2406.JPG|800px]]
[[File:IMG2406.JPG|800px]]
Plug a wire on each controller. Fix the controllers in each corner using the nuts and washers attached to them.
Plug a wire on each controller. Fix the controllers in each corner using the nuts and washers attached to them.
[[File:Rotary&wire.JPG|400px]]
[[File:Rotary&wire.JPG|400px]]
===Connect the Controllers===
===Connect the Controllers===
Connect the 4 controller cables to the 4 controller connectors on the ZynScreen (CTRL1, CTRL2, CTRL3, CTRL4)
Connect the 4 controller cables to the 4 controller connectors on the ZynScreen (CTRL1, CTRL2, CTRL3, CTRL4). Wire color order doesn't matter. Harness wires are crossed, so depending what connector did you plug on the encoder side, you have to plug the other one on the display. There are 2 combinations.