2,706
edits
Changes
Jump to navigation
Jump to search
Line 46:
Line 46: − + Line 282:
Line 282: − + − − − Wire color order doesn't matter. Harness wires are crossed, so depending what connector did you plug on the encoder side, you have to plug the other one on the display. There are 2 combinations.
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 17:06, 9 September 2020
, 17:06, 9 September 2020→Zynthian Software
The easiest way of getting the software is downloading the last ''official'' SD image from here:
The easiest way of getting the software is downloading the last ''official'' SD image from here:
'''[https://os.zynthian.org/2020-05-27-zynthianos-buster-lite-1.0.0-RC2.zip Download Zynthian "Buster RC-2" SD-image]'''
'''[https://os.zynthian.org/zynthianos-last-stable.zip Download Last Stable ZynthianOS SD-image]'''
It's a compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3. The SD-card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
It's a compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3. The SD-card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
===Connect the Controllers===
===Connect the Controllers===
Connect the 4 controller cables to the 4 controller connectors on the ZynScreen (CTRL1, CTRL2, CTRL3, CTRL4)
Connect the 4 controller cables to the 4 controller connectors on the ZynScreen (CTRL1, CTRL2, CTRL3, CTRL4). Wire color order doesn't matter. Harness wires are crossed, so depending what connector did you plug on the encoder side, you have to plug the other one on the display. There are 2 combinations.
[[File:ZynScreenConnect.JPG|600px]]
[[File:ZynScreenConnect.JPG|600px]]
===Connect the MIDI connectors & activity LEDs===
===Connect the MIDI connectors & activity LEDs===