2,718
edits
Changes
Jump to navigation
Jump to search
Line 313:
Line 313: − +
Building a Zynthian Box using an official Kit (view source)
Revision as of 20:37, 16 January 2017
, 20:37, 16 January 2017→Test the Controllers
1. Push the 'SELECT' controller. You should get into the 'Engine Selection' screen.
1. Push the 'SELECT' controller. You should get into the 'Engine Selection' screen.
If it doesn't works, try pushing the 'LS' controller. Perhaps you have cross-wired the 3 & 4 controllers and in that case, you have to fix the wiring. If it doesn't work, try pushing the other two controllers and rotating the controllers. If something happens, most probably you have reversed the wiring order when connecting the controllers, or perhaps you have changed some wires while connecting the parts. Double-check the wiring again.
If it doesn't works, try pushing the 'LS' controller. Perhaps you have cross-wired the 3 & 4 controllers and in that case, you have to fix the wiring. If it doesn't work, try pushing the other two controllers and rotating the controllers. If something happens, most probably you have reversed the wiring order when connecting the controllers, or perhaps you have changed some wires while connecting the main ribbon bus. Double-check the wiring again.
2. Rotate the 'SELECT' controller to select the engine you want to start.
2. Rotate the 'SELECT' controller to select the engine you want to start.