2,718
edits
Changes
Jump to navigation
Jump to search
Line 278:
Line 278: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Building a Zynthian Box using an official Kit (view source)
Revision as of 18:46, 16 January 2017
, 18:46, 16 January 2017→Connect the Jack connectors
'''PHOTO NEEDED HERE''' => Detail HifiBerry audio-out connecter
'''PHOTO NEEDED HERE''' => Detail HifiBerry audio-out connecter
=Test everything=
And that's all. Your Zynthian Box is almost ready to boot. I recommend that you double-check everything. It's easy to make a mistake while assembling the parts or connecting everything.
When you are pretty sure that everything is in its place, it's time to test that everything is working correctly, so:
1. insert the SD-card with the zynthian image ready to run
2. plug the mini-usb power cord
These are the stages that you should see while booting:
1. Initially, the display must go white
2. After 5-10 seconds, it will show the Zynthian splash screen
3. After 1-2 seconds, it go black
4. If you are using a fresh zynthian image, the stages 2 and 3 will be repeated
5. After 5-10 seconds, the zynthian UI will be shown
If you get the Zynthian UI, congratulations!!! You are really close toget it!!
If not, bad luck! Probably you made some mistake during the mounting process. You have to [[ locate and solve the problem(s)]].
=Close the Case=
Closing the case can be a little bit tricky. Take your time to see how the cables ...
=Locating and Solving problems=
In this section i will try to give you some tips for locating and solving the problems you may have.
For solving problems, i really recommend to connect a HDMI display to the RBPi. It will give you accurate information during the booting sequence. Also, if you connect a USB keyboard, you can login into the system and get extra information, inspect the logs, etc.
===The display don't go white in the boot stage 1===
In that case it's very probable you haven't solder correctly the side 26-pin connector. You should double check
=Technical Reference=
=Technical Reference=