2,718
edits
Changes
Jump to navigation
Jump to search
Line 146:
Line 146: + + Line 158:
Line 160: + + +
Building a Zynthian Box using an official Kit (view source)
Revision as of 19:34, 15 January 2017
, 19:34, 15 January 2017no edit summary
+ 40 row-pin GPIO male connector, for connecting the '''main ribbon bus cable'''
+ 40 row-pin GPIO male connector, for connecting the '''main ribbon bus cable'''
+ 3 pin header connector, for connecting the extra audio line-out Jack connectors
+ 3 pin header connector, for connecting the extra audio line-out Jack connectors
[[File:Hifiberry_dacplus_extra_connectors_mounted.jpg|600px]]
===PiTFT 2.8' TouchScreen customizing===
===PiTFT 2.8' TouchScreen customizing===
If you have a clonic PiTFT 2.8' touchscreen, probably you don't have the side 26-pin male connector soldered in the board, so you should solder it by your own. Also, normally the female connector in the clonic versions is higher that in the original and more annoying yet, so, you will want to remove it with a saw. If you do so, i also recommend to use a vice.
If you have a clonic PiTFT 2.8' touchscreen, probably you don't have the side 26-pin male connector soldered in the board, so you should solder it by your own. Also, normally the female connector in the clonic versions is higher that in the original and more annoying yet, so, you will want to remove it with a saw. If you do so, i also recommend to use a vice.
[[File:Clonic_pitft_tweaked_connectors.jpg|600px]]
===Other Soundcards and Displays===
===Other Soundcards and Displays===