2,718
edits
Changes
Jump to navigation
Jump to search
Line 242:
Line 242: − − Line 487:
Line 485: − TODO!+ + + + + + − TODO!+ + + + + +
Building a Zynthian Box using an official Kit (view source)
Revision as of 18:25, 18 January 2017
, 18:25, 18 January 2017no edit summary
https://discourse.zynthian.org/c/building-zynthian
https://discourse.zynthian.org/c/building-zynthian
===Building the MIDI-IN connector===
===Building the MIDI-IN connector===
===Test the MIDI-USB inputs===
===Test the MIDI-USB inputs===
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and instrument
3. Connect a MIDI-USB keyboard to any USB port. The keyboard should be configured to use channel #1.
3. After 2-3 seconds , play something with your keyboard. A simple ''Chopin's Nocturni'' would be enough. You should hear your music ;-)
If this doesn't work, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
===Test the MIDI-IN connector===
===Test the MIDI-IN connector===
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and instrument
3. Connect your keyboard's MIDI-OUT to the Zynthian's MIDI-IN using a MIDI cable. The keyboard should be configured to use channel #1.
3. After 2-3 seconds, play something with your keyboard. OK! A single melody can do the task. You should hear your song ;-)
If this doesn't work, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
=Close the Case=
=Close the Case=