2,718
edits
Changes
Jump to navigation
Jump to search
Line 94:
Line 94: − + Line 107:
Line 107: + + + + − + Small Pliers − + Side cutter − + +
Building a Zynthian Box using an official Kit (view source)
Revision as of 18:35, 17 January 2017
, 18:35, 17 January 2017→Building the Zynthian Kit parts
===Prerequisites===
===Prerequisites===
Building your own Zynthian Box is not very difficult, but you will need all your attention and some basic tools and skills. Read the instructions and observe the detailed photos carefully. If you get in trouble you can ask the community:
Building your own Zynthian Box is not very difficult, but you will need all your attention, some basic tools and a few skills. Read the instructions and observe the detailed photos carefully. If you get in trouble you can ask the community:
https://discourse.zynthian.org
https://discourse.zynthian.org
====Tools====
====Tools====
And this is the list of required and recommended tools:
+ Soldering iron
+ Soldering iron
+ Tin-solder
+ Tin-solder
+ Wire-cutter
+ Small Pliers
+ Screw drivers
+ Screw drivers
+ PCB holder for soldering (very recommended!)
+ PCB holder for soldering (very recommended!)
+ Small iron brush (recommended)
+ Small iron brush (very recommended!)
+ Magnifiying glass (recommended)
+ Magnifiying glass (recommended)
+ A vice (recommended)
+ A vice (recommended)
+ A hand saw for metal (recommended)
+ Multimeter (recommended!)
+ Multimeter (recommended!)