Building Zynthian MINI V2

To assemble zynthian mini V2 version you will require:

• PCB that need to be produced based on KiCad design that you can find in zynthian hardware repository.
• Components that need to be soldered to this PCB.
• 5" Screen
• Raspberry Pi 4 with heatsink
• optional: zynthian MINI V2 3d printable case

1 Assembling the PCB

NOTE: Do not be confused that some of the instruction images shown here do not fully align to V2 PCB layout. This is because they are taken with original MINI V2 PCB that had few issues that are now fixed and therefore some small change will be there. Always read the label of the component on the PCB if confused.

1.1 Components required

1. Capacitors - Electrolytic - Polarized

• Value: 470u 10V
• PCB label: C1
• Package: CP_Radial_D8.0mm_P3.50mm
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/1005003189675117.html

2. Capacitor - Electrolytic - Polarized

• Value: 100u
• PCB label: C4
• Package: CP_Radial_D6.3mm_P2.50mm
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/1005003189675117.html

3. Capacitor - Film - Non-Polarized

• Value: 100n
• PCB label: C2,C3,C5,C6,C7
• Package: C_Rect_L7.0mm_W2.0mm_P5.00mm
• Quantity: 5
• Where to buy: https://www.aliexpress.com/item/1005005894912292.html

4. Capacitors - Ceramic - Non-Polarized 100n and 10n

• Value: 100n
• PCB label: C22,C16,C19,C13,C23,C20,C9,C26,C27,C32,C8,C18,C21,C34,C33,C17,C25,C11,C24,C31,C12,C15,C10,C14
• Package: C_Rect_L4.0mm_W2.5mm_P2.50mm
• Quantity: 24
• Where to buy: https://www.aliexpress.com/item/1005002290441861.htm
• Value: 10n
• PCB label: C30,C29,C35,C37,C38,C28,C39,C36
• Package: C_Rect_L4.0mm_W2.5mm_P2.50mm
• Quantity: 8
• Where to buy: https://www.aliexpress.com/item/1005002290441861.htm

5. Diode

• Value: 1N4148
• PCB label: D1
• Package: D_DO-35_SOD27_P7.62mm_Horizontal
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/32660088529.html

6. MIDI Connectors - PCB mountable

• PCB label: MIDI-OUT-J1, MIDI-IN-J1, MIDI-THRU-J1
• Package: MultiDIN5
• Quantity: 3
• Where to buy: https://www.aliexpress.com/item/1005005773478404.html

7. Resistors

• Value: 220R
• PCB label: R1,R3,R5,R4,R6
• Package: R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal
• Quantity: 5
• Where to buy: https://www.aliexpress.com/item/1005005669886834.html

8. Resistor

• Value: 1k
• PCB label: R2
• Package: R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/1005005669886834.html

9. Resistor

• Value: 10k
• PCB label: R8,R7
• Package: R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal
• Quantity: 2
• Where to buy: https://www.aliexpress.com/item/1005005669886834.html

10. Digital Optocoupler

• Value: H11L1M
• PCB label: U2
• Package: DIP-6_W7.62mm
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/32867427644.html

11. Hex inverting Schmitt trigger

• Value: 74HCT14
• PCB label: U1
• Package: DIP-14_W7.62mm
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/33020259485.html

12. Sound Card PCM5102

• Value: GY-PCM5102
• PCB label: A1
• Package: GY-PCM5102
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/1005002898278583.html

13. I/O Expander

• Value: MCP23017_SP
• PCB label: MCPMCP23017_SP1, MCPMCP23017_SP2
• Package: DIP-28_W7.62mm
• Quantity: 2
• Where to buy: https://www.aliexpress.com/item/1005005363863079.html

14. 2x20 Pin Header - male and female

• Male:
• PCB label: HAT1
• Package: PinSocket_2x20_P2.54mm_Vertical
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/4000133266617.html
• Female:
• PCB label: RPi1
• Package: two spacer female 40pin vertical header
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/4001095693537.html

15. Encoder with a Switch

• Value:
• PCB label: Enc2,Enc4,Enc1,Enc3
• Package: RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm
• Quantity: 4
• Where to buy: https://www.aliexpress.com/item/1005006142236380.html

16. Encoder Cap

• Value: encoder caps
• PCB label: Encoder caps
• Package: Encoder caps
• Quantity: 4
• Where to buy: https://www.aliexpress.com/item/1005005835327286.html

17. Push Button

• Value:
• PCB label:SW14,SW9,SW16,SW20,SW6,SW10,SW8,SW2,SW17,SW4,SW12,SW19,SW5,SW1,SW13,SW18,SW15,SW7,SW11,SW3
• Package: push-button
• Quantity: 20
• Where to buy: https://www.aliexpress.com/item/32912263133.html

18. 5" DSI Screen for Raspberry Pi

• Value: Screen
• PCB label: RPI 5" screen
• Package: RPI screen
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/1005005353135304.html

19. Raspberry Pi 4 4GB with heatsink

• Where to buy heatsink: https://www.aliexpress.com/item/1005004774833369.html

20. 1/4 Stereo jack

• Value: J1
• PCB label: J1
• Package: Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/4001266094691.html

21. RCA Stereo jack

• Value: J2
• PCB label: J2
• Package: RCA RS-234
• Quantity: 1
• Where to buy: https://www.aliexpress.com/item/1005001629197904.html

1.2 Soldering

First get PCB and all components sorted by their type. Check their values using digital multimeter to make sure that you have them properly sorted.

Heat up the solder iron and make sure that its tip is clean. If not put some solder on it and clean it with wet sponge. It has to be shiny silver tip.

Start by soldering back side of the PCB. Order of soldering is always from smallest to tallest components.

First solder resistors and diode and microchips such as Digital optocoupler (H11L1M), hex inverting schmitt trigger (74HCT14) and I/O Expander (MCP23017). Pay attention to orientation of these microchips.

Solder the ceramic and film capacitors at the back of PCB (orientation not important - they are non polarized).

Then solder film and ceramic capacitors at the front (orientation not important - they are non polarized).

Then solder female and male headers

Then solder two electrolytic capacitors. Pay attention to their orientation.

Then solder sound card. First solder male header pins that came with the card and the solder it to PCB board.

Make sure that you have cut sound card pins - they are too long and they will touch the screen if you leave them as it is.

Then solder three MIDI connectors.

Then solder the switches.

Finally solder the encoders. After soldering them cut any excess wires because that side will be very close to RPI heatsink so any contact to it must be avoided.

You have finished the hard part - soldering. Now you just need to assemble everything together.

1.3 Assembling the PCB for the test

This instruction here are just assembling everything for testing. You should test it before assembling into the case.

First remove two screen posts that are not necessary and could touch some of the PCB components.

Then connect longer cable that comes with a screen to the screen and attach the screen to PCB.

Then screw appropriate hex mounts to PCB for Raspberry Pi. Do not connect Raspberry Pi yet. The type of hex mounts will depend on heatsink that you use. Also connect the screen cable to RPI.

Then connect heatsink to raspberry pi.

Then connect raspberry Pi to PCB.

1.4 Configure Zynthian MINI V2 for testing

Once everything is configured and working it is a time to put zynthian into the enclosure.