2,718
edits
Changes
Jump to navigation
Jump to search
Line 598:
Line 598: + + Line 606:
Line 608: − +
Assembling Zynthian Kit V5 (view source)
Revision as of 12:11, 16 September 2023
, 12:11, 16 September 2023→Close the aluminum case
<br clear=all>
<br clear=all>
[[File:capture000158_fixed_1024.jpg|600px|right]]
'''4.''' Before securing the case top, it's a time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]''' and check everything is working OK. Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully. If you have problems, try with a different SD-card before reporting.
'''4.''' Before securing the case top, it's a time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]''' and check everything is working OK. Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully. If you have problems, try with a different SD-card before reporting.
[[File:capture000125_fixed_wiki.jpg|600px|right]]
[[File:capture000125_fixed_wiki.jpg|600px|right]]
'''4.''' Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.
'''5.''' If everything worked fine and your zynthian booted, finish the task before start exploring your new zynthian V5. Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.
<br clear=all>
<br clear=all>