2,718
edits
Changes
Jump to navigation
Jump to search
Line 547:
Line 547: + + + + + + + + + + + + + + + + + + + + + + + + +
→Step 15: Close the aluminum case
=='''Step 15: Close the aluminum case'''==
=='''Step 15: Close the aluminum case'''==
<br clear=all>
[[File:capture000120_fixed_wiki.jpg|600px|right]]
'''1.''' Fit the upper part into the lower part forming a 90º angle, as shown in the picture.
<br clear=all>
[[File:capture000121_fixed_wiki.jpg|600px|right]]
'''2.''' Note the way the display flat cable naturally bends. You should force this bending by pressing with your fingers and marking a 45º fold. Zoom in the picture to see the detail.
<br clear=all>
[[File:capture000123_fixed_wiki.jpg|600px|right]]
'''3.''' Close the case slowly, taking care of cables not being trapped.
<br clear=all>
[[File:capture000124_fixed_wiki.jpg|600px|right]]
[[File:capture000125_fixed_wiki.jpg|600px|right]]
'''4.''' Take the remaining 6 x ISO M3 screws and secure the case, 3 on each side. Tight enough, but not too much.
<br clear=all>
<br clear=all>