2,718
edits
Changes
Jump to navigation
Jump to search
Line 327:
Line 327: + + + + + + + + + + + + + + + + + + + + + +
→Step 7: Stick the SD-card holder cover
'''3.''' Stick it on the main board's SD-card holder, so it is well-adjusted, touching the aluminum case.
'''3.''' Stick it on the main board's SD-card holder, so it is well-adjusted, touching the aluminum case.
<br clear=all>
=='''Step 8: Secure the thermal block to the aluminum case bottom'''==
<br clear=all>
[[File:capture000079_fixed_wiki.jpg|600px|right]]
'''1.''' Look for 2 x DIN M3 screws. They have conic-flat head.
<br clear=all>
[[File:capture000081_fixed_wiki.jpg|600px|right]]
'''2.''' Turn up-down the aluminum case bottom and look for the 2 countersunk holes. Using the allen wrench, poke the thermal pad through the holes.
<br clear=all>
[[File:capture000082_fixed_wiki.jpg|600px|right]]
'''3.''' Screw the 2 bolts and tight them strong enough, but not too much.
<br clear=all>
<br clear=all>