2,718
edits
Changes
Jump to navigation
Jump to search
Line 73:
Line 73: − + Line 85:
Line 85: − + Line 91:
Line 91: − + Line 97:
Line 97: − + Line 107:
Line 107: − + Line 113:
Line 113: − + Line 119:
Line 119: − + Line 143:
Line 143: − + − + Line 167:
Line 167: − + Line 173:
Line 173: − + Line 179:
Line 179: − + Line 185:
Line 185: − + Line 195:
Line 195: − + Line 201:
Line 201: − + Line 207:
Line 207: − + Line 213:
Line 213: − + Line 222:
Line 222: − + Line 228:
Line 228: − + − + Line 239:
Line 239: − + Line 245:
Line 245: − + Line 251:
Line 251: − + Line 257:
Line 257: − + Line 263:
Line 263: − + Line 273:
Line 273: − + Line 279:
Line 279: − + Line 285:
Line 285: − + Line 291:
Line 291: − + Line 297:
Line 297: − + Line 307:
Line 307: − + Line 313:
Line 313: − + Line 319:
Line 319: − +
→I. BOTTOM PART
<br clear=all>
<br clear=all>
[[File:capture000028_fixed_wiki.JPG|400px|right]]
[[File:capture000028_fixed_wiki.JPG|600px|right]]
Be careful when opening the screws bag. Some of them are really small and you could easily lost them. Please, don't dump them on the table's surface or on top a piece of paper. We recommend to dump the bag's content in an small tray, so you can look and take the parts easily, but getting them well confined so they can't be easily lost.
Be careful when opening the screws bag. Some of them are really small and you could easily lost them. Please, don't dump them on the table's surface or on top a piece of paper. We recommend to dump the bag's content in an small tray, so you can look and take the parts easily, but getting them well confined so they can't be easily lost.
<br clear=all>
<br clear=all>
[[File:IMG_4112_fixed_wiki.JPG|400px|right]]
[[File:IMG_4112_fixed_wiki.JPG|600px|right]]
'''1.''' Look for the aluminum case bottom part in the "V5" case:
'''1.''' Look for the aluminum case bottom part in the "V5" case:
<br clear=all>
<br clear=all>
[[File:IMG_4041_fixed_wiki.JPG|400px|right]]
[[File:IMG_4041_fixed_wiki.JPG|600px|right]]
'''2.''' Look for the 4 x rubber feet inside the wiring bag, in the "Screen and Bits" case:
'''2.''' Look for the 4 x rubber feet inside the wiring bag, in the "Screen and Bits" case:
<br clear=all>
<br clear=all>
[[File:IMG_4118_fixed_wiki.JPG|400px|right]]
[[File:IMG_4118_fixed_wiki.JPG|600px|right]]
'''3.''' Stick the 4 x rubber feet to the aluminum case bottom part. This will prevent scratches during the assembling process.
'''3.''' Stick the 4 x rubber feet to the aluminum case bottom part. This will prevent scratches during the assembling process.
<br clear=all>
<br clear=all>
[[File:IMG_4123_fixed_wiki.JPG|400px|right]]
[[File:IMG_4123_fixed_wiki.JPG|600px|right]]
'''1.''' Look for the display ribbon cable in the "Screen and Bits" case. It's 20cm long and 1.6cm wide:
'''1.''' Look for the display ribbon cable in the "Screen and Bits" case. It's 20cm long and 1.6cm wide:
<br clear=all>
<br clear=all>
[[File:IMG_4090_fixed_wiki.JPG|400px|right]]
[[File:IMG_4090_fixed_wiki.JPG|600px|right]]
'''2.''' Look for the RPi4 compute module in the "Accessories" case.
'''2.''' Look for the RPi4 compute module in the "Accessories" case.
<br clear=all>
<br clear=all>
[[File:IMG_4135_fixed_wiki.JPG|400px|right]]
[[File:IMG_4135_fixed_wiki.JPG|600px|right]]
'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, leaving the blue side facing out. When the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one each hand.
'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, leaving the blue side facing out. When the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one each hand.
--------------
--------------
<br>
<br>
[[File:IMG_4045_fixed_wiki.JPG|400px|right]]
[[File:IMG_4045_fixed_wiki.JPG|600px|right]]
[[File:IMG_4142_fixed_wiki.JPG|400px|right]]
[[File:IMG_4142_fixed_wiki.JPG|600px|right]]
'''1.''' Look for a piece of thermal pad in the wiring bag, in the "Screen and Bits" case. It is a piece with an approximate size of 60 x 20 mm, gray on one side and blue on the other.
'''1.''' Look for a piece of thermal pad in the wiring bag, in the "Screen and Bits" case. It is a piece with an approximate size of 60 x 20 mm, gray on one side and blue on the other.
<br clear=all>
<br clear=all>
[[File:IMG_4156_fixed_wiki.JPG|400px|right]]
[[File:IMG_4156_fixed_wiki.JPG|600px|right]]
'''3.''' Remove the blue protective sheet from the 3 smaller pieces and stick them to the inner side of the thermal block, the one that makes contact with the RPi4. You'll recognize it because it has 3 small rectangular islands that fit the size of the 3 smaller pieces you cut out. You can use your finger to press the thermal pad and stick it. Use your fingernail to cut off the excess, if any.
'''3.''' Remove the blue protective sheet from the 3 smaller pieces and stick them to the inner side of the thermal block, the one that makes contact with the RPi4. You'll recognize it because it has 3 small rectangular islands that fit the size of the 3 smaller pieces you cut out. You can use your finger to press the thermal pad and stick it. Use your fingernail to cut off the excess, if any.
<br clear=all>
<br clear=all>
[[File:IMG_4191_fixed_wiki.JPG|400px|right]]
[[File:IMG_4191_fixed_wiki.JPG|600px|right]]
'''4.''' Take 4 x ISO7380 M2.5 screws. They are the smaller ones with rounded head.
'''4.''' Take 4 x ISO7380 M2.5 screws. They are the smaller ones with rounded head.
<br clear=all>
<br clear=all>
[[File:IMG_4163_fixed_wiki.JPG|400px|right]]
[[File:IMG_4163_fixed_wiki.JPG|600px|right]]
'''5.''' After this, remove the transparent protective sheet from the 3 pieces of thermal pad and fixate the RBPi4 compute module to the thermal block using the 4 x ISO7380 M2.5 screws.
'''5.''' After this, remove the transparent protective sheet from the 3 pieces of thermal pad and fixate the RBPi4 compute module to the thermal block using the 4 x ISO7380 M2.5 screws.
<br clear=all>
<br clear=all>
[[File:IMG_4188_fixed_wiki.JPG|400px|right]]
[[File:IMG_4188_fixed_wiki.JPG|600px|right]]
'''6.''' Finally, stick the remaining piece of thermal pad (27 x 20 mm) on the contact surface in the external side of the thermal block. That is, on top of the "tower" with 2 tiny holes. Follow the same procedure you already did with the 3 smaller pieces, but don't remove the transparent protective sheet yet.
'''6.''' Finally, stick the remaining piece of thermal pad (27 x 20 mm) on the contact surface in the external side of the thermal block. That is, on top of the "tower" with 2 tiny holes. Follow the same procedure you already did with the 3 smaller pieces, but don't remove the transparent protective sheet yet.
<br clear=all>
<br clear=all>
[[File:IMG_4108_fixed_wiki.JPG|400px|right]]
[[File:IMG_4108_fixed_wiki.JPG|600px|right]]
'''1.''' Take the main board from its case.
'''1.''' Take the main board from its case.
<br clear=all>
<br clear=all>
[[File:IMG_4191_fixed_wiki.JPG|400px|right]]
[[File:IMG_4191_fixed_wiki.JPG|600px|right]]
'''2.''' Take 4 x ISO7380 M2.5 screws. They are the smaller ones with rounded head.
'''2.''' Take 4 x ISO7380 M2.5 screws. They are the smaller ones with rounded head.
<br clear=all>
<br clear=all>
[[File:IMG_4230_fixed_wiki.JPG|400px|right]]
[[File:IMG_4230_fixed_wiki.JPG|600px|right]]
'''3.''' Plug the RBPi4 (with the thermal block attached) on the Main Board's RBPi4 socket, the big one with 2 rows of 20 pin-holes each. Put attention to not bending any pin.
'''3.''' Plug the RBPi4 (with the thermal block attached) on the Main Board's RBPi4 socket, the big one with 2 rows of 20 pin-holes each. Put attention to not bending any pin.
<br clear=all>
<br clear=all>
[[File:IMG_4195_fixed_wiki.JPG|400px|right]]
[[File:IMG_4195_fixed_wiki.JPG|600px|right]]
'''4.''' Fixate the thermal block to the main board from the backside using the 4 x M2.5 screws.
'''4.''' Fixate the thermal block to the main board from the backside using the 4 x M2.5 screws.
<br clear=all>
<br clear=all>
[[File:IMG_4221_fixed_wiki.JPG|400px|right]]
[[File:IMG_4221_fixed_wiki.JPG|600px|right]]
'''5.''' Take 7 x ISO7380 M3 screws. They are the mid-size ones with rounded head.
'''5.''' Take 7 x ISO7380 M3 screws. They are the mid-size ones with rounded head.
<br clear=all>
<br clear=all>
[[File:IMG_4202_fixed_wiki.JPG|400px|right]]
[[File:IMG_4202_fixed_wiki.JPG|600px|right]]
[[File:IMG_4276_fixed_wiki.JPG|400px|right]]
[[File:IMG_4276_fixed_wiki.JPG|600px|right]]
'''6.''' Remove the transparent protective sheet from the piece of thermal pad sticked in the thermal block bottom and softly place the main board in the aluminum case bottom. Fixate it using 7 x ISO7380 M3 screws.
'''6.''' Remove the transparent protective sheet from the piece of thermal pad sticked in the thermal block bottom and softly place the main board in the aluminum case bottom. Fixate it using 7 x ISO7380 M3 screws.
<br clear=all>
<br clear=all>
[[File:IMG_4270_fixed_wiki.JPG|400px|right]]
[[File:IMG_4270_fixed_wiki.JPG|600px|right]]
'''1.''' Look for the SD-card adapter in the wiring bag.
'''1.''' Look for the SD-card adapter in the wiring bag.
<br clear=all>
<br clear=all>
[[File:IMG_4282_fixed_wiki.JPG|400px|right]]
[[File:IMG_4282_fixed_wiki.JPG|600px|right]]
'''2.''' Carefully, using 2 fingers, one each hand, pull the main board's SD-card connector tongue until it's totally open.
'''2.''' Carefully, using 2 fingers, one each hand, pull the main board's SD-card connector tongue until it's totally open.
<br clear=all>
<br clear=all>
[[File:IMG_4286_fixed_wiki.JPG|400px|right]]
[[File:IMG_4286_fixed_wiki.JPG|600px|right]]
'''3.''' Insert the SD-card adapter's ribbon cable. It must be inserted straight, leaving the blue face downside.
'''3.''' Insert the SD-card adapter's ribbon cable. It must be inserted straight, leaving the blue face downside.
<br clear=all>
<br clear=all>
[[File:IMG_4289_fixed_wiki.JPG|400px|right]]
[[File:IMG_4289_fixed_wiki.JPG|600px|right]]
'''4.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector.
'''4.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector.
<br clear=all>
<br clear=all>
[[File:IMG_4296_fixed_wiki.JPG|400px|right]]
[[File:IMG_4296_fixed_wiki.JPG|600px|right]]
'''4.''' Insert the SD-card adapter into the RPI4's SD-card holder.
'''4.''' Insert the SD-card adapter into the RPI4's SD-card holder.
<br clear=all>
<br clear=all>
[[File:IMG_4258_fixed_wiki.JPG|400px|right]]
[[File:IMG_4258_fixed_wiki.JPG|600px|right]]
'''1.''' Look for the USB-C adapter in the wiring bag.
'''1.''' Look for the USB-C adapter in the wiring bag.
<br clear=all>
<br clear=all>
[[File:IMG_4291_fixed_wiki.JPG|400px|right]]
[[File:IMG_4291_fixed_wiki.JPG|600px|right]]
'''2.''' Carefully, using 2 fingers, one each hand, pull the main board's USB-C connector tongue until it's totally open.
'''2.''' Carefully, using 2 fingers, one each hand, pull the main board's USB-C connector tongue until it's totally open.
<br clear=all>
<br clear=all>
[[File:IMG_4294_fixed_wiki.JPG|400px|right]]
[[File:IMG_4294_fixed_wiki.JPG|600px|right]]
'''3.''' Insert the USB-C adapter's ribbon cable. It must be inserted straight, leaving the blue face downside.
'''3.''' Insert the USB-C adapter's ribbon cable. It must be inserted straight, leaving the blue face downside.
<br clear=all>
<br clear=all>
[[File:IMG_4303_fixed_wiki.JPG|400px|right]]
[[File:IMG_4303_fixed_wiki.JPG|600px|right]]
'''4.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector.
'''4.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector.
<br clear=all>
<br clear=all>
[[File:IMG_4300_fixed_wiki.JPG|400px|right]]
[[File:IMG_4300_fixed_wiki.JPG|600px|right]]
'''5.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector.
'''5.''' When it's totally inserted, push the tongue with 2 fingers at once and close the connector.
<br clear=all>
<br clear=all>
[[File:capture000029_fixed_wiki.JPG|400px|right]]
[[File:capture000029_fixed_wiki.JPG|600px|right]]
'''1.''' Look for the SD-card holder cover in the wiring bag.
'''1.''' Look for the SD-card holder cover in the wiring bag.
<br clear=all>
<br clear=all>
[[File:capture000030_fixed_wiki.JPG|400px|right]]
[[File:capture000030_fixed_wiki.JPG|600px|right]]
'''2.''' Remove the protective sheet.
'''2.''' Remove the protective sheet.
<br clear=all>
<br clear=all>
[[File:capture000034_fixed_wiki.JPG|400px|right]]
[[File:capture000034_fixed_wiki.JPG|600px|right]]
'''3.''' Stick it on the main board's SD-card holder, so it is well-adjusted, touching the aluminum case.
'''3.''' Stick it on the main board's SD-card holder, so it is well-adjusted, touching the aluminum case.