2,718
edits
Changes
Jump to navigation
Jump to search
Line 131:
Line 131: − + Line 599:
Line 599: − + + + + + + + + Line 606:
Line 613: − + Line 648:
Line 655: − + + + + +
Assembling Zynthian Kit V5 (view source)
Revision as of 10:18, 14 December 2023
, 10:18, 14 December 2023→Install the display ribbon cable to the RPi4
<br clear=all>
<br clear=all>
=='''Install the display ribbon cable to the RPi4'''==
=='''Plug the display ribbon cable into the RPi4'''==
<br clear=all>
<br clear=all>
<br clear=all>
<br clear=all>
'''4.''' Before securing the case top, it's a time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]''' and check everything is working OK. Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully. If you have problems, try with a different SD-card before reporting.
[[File:capture000158_fixed_1024.jpg|600px|right]]
'''4.''' '''Before securing the case top and the knobs''', it's a good time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]''' and check everything is working OK.
Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully.
First boot could take some time. Don't be impatient and wait until you see the splash screen with the logo. If the display remains black after 1 minute, please, re-check the [[Zynthian Software|instructions]] and re-burn the SD-card again. If this still don't work, try with a different SD-card before reporting in the [https://discourse.zynthian.org forum]. For solving SD-card issues, it could be useful to [https://raspberrytips.com/green-and-red-light-on-raspberry-pi check the RPi4 status LEDs].
Once you see the splash screen, it could take some minutes until the system is ready. You deserve a beer, or at less some some tea or coffee. When the first-boot process finishes, the zynthian will reboot and you will be in the main menu, ready to play.
<br clear=all>
<br clear=all>
[[File:capture000125_fixed_wiki.jpg|600px|right]]
[[File:capture000125_fixed_wiki.jpg|600px|right]]
'''4.''' Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.
'''5.''' If everything worked fine and your zynthian booted, finish the task before start exploring your new zynthian V5. Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.
<br clear=all>
<br clear=all>
[[File:capture000158_fixed_1024.jpg|600px|right]]
[[File:capture000158_fixed_1024.jpg|600px|right]]
'''6.''' Congratulations! Your Zynthian V5 is ready to boot for the first (or the second!) time. If you didn't yet, it's time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]'''. Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully. If you have problems, try with a different SD-card before reporting.
'''6.''' '''Congratulations!''' Your Zynthian V5 is ready to boot for the first (or second??) time. '''If you didn't yet''', it's time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]'''. Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully.
First boot could take some time. Don't be impatient and wait until you see the splash screen with the logo. If the display remains black after 1 minute, please, re-check the [[Zynthian Software|instructions]] and re-burn the SD-card again. If this still don't work, try with a different SD-card before reporting in the [https://discourse.zynthian.org forum]. For solving SD-card issues, it could be useful to [https://raspberrytips.com/green-and-red-light-on-raspberry-pi check the RPi4 status LEDs].
Once you see the splash screen, it could take some minutes until the system is ready. You deserve a beer, or at less some some tea or coffee. When the first-boot process finishes, the zynthian will reboot and you will be in the main menu, ready to play.
<br clear=all>
<br clear=all>