Changes

<br clear=all>

<br clear=all>

=='''Install the display ribbon cable to the RPi4'''==

=='''Plug the display ribbon cable into the RPi4'''==

<br clear=all>

<br clear=all>

[[File:IMG_4135_fixed_wiki.JPG|600px|right]]

[[File:IMG_4135_fixed_wiki.JPG|600px|right]]

'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, with the blue side facing out. When the cable is tightly inserted, close the connector by pushing the tongue with 2 fingers, one of each hand. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, with the blue side facing out. '''All flat cables in the V5 kit are reversible, so you can take any of the 2 caps''', while taking care of placing the blue side facing out. When the cable is tightly inserted, close the connector by pushing the tongue with 2 fingers, one of each hand. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

<br clear=all>

<br clear=all>

[[File:capture000086_fixed_wiki.jpg|600px|right]]

[[File:capture000086_fixed_wiki.jpg|600px|right]]

'''3.''' Insert the ribbon cable into the FPC connector. It must be inserted straight, with the blue side face down.

'''3.''' Insert the ribbon cable into the FPC connector. It must be inserted straight, with the blue side facing down. '''All flat cables in the V5 kit are reversible, so you can take any of the 2 caps''', while taking care of placing the blue side facing down.

<br clear=all>

<br clear=all>

[[File:capture000123_fixed_wiki.jpg|600px|right]]

[[File:capture000123_fixed_wiki.jpg|600px|right]]

'''3.''' Close the case slowly, taking care that the cables are not being trapped.  

'''3.''' Close the case slowly, taking care that the cables are not being trapped.

 

 

 

 

 

Once you see the splash screen, it could take some minutes until the system is ready. You deserve a beer, or at less some some tea or coffee. When the first-boot process finishes, the zynthian will reboot and you will be in the main menu, ready to play.

<br clear=all>

<br clear=all>

[[File:capture000125_fixed_wiki.jpg|600px|right]]

[[File:capture000125_fixed_wiki.jpg|600px|right]]

'''4.''' Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.

'''5.''' If everything worked fine and your zynthian booted, finish the task before start exploring your new zynthian V5. Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.

<br clear=all>

<br clear=all>

[[File:capture000158_fixed_1024.jpg|600px|right]]

[[File:capture000158_fixed_1024.jpg|600px|right]]

'''6.''' Congratulations! Your Zynthian V5 is ready to boot for the first time. It's time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]'''.

'''6.''' '''Congratulations!''' Your Zynthian V5 is ready to boot for the first (or second??) time. '''If you didn't yet''', it's time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]'''. Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully.

 

 

 

<br clear=all>

<br clear=all>