Changes

[[File:IMG_4230_fixed_wiki.JPG|600px|right]]

[[File:IMG_4230_fixed_wiki.JPG|600px|right]]

'''3.''' Plug the RBPi4 (with the thermal block attached) on the Main Board's RBPi4 socket, the big one with 2 rows of 20 pin-holes each. Put attention to not bending any pin.

'''3.''' Plug the RBPi4 (with the thermal block attached) on the Main Board's RBPi4 socket, the big one with 2 rows of 20 pin-holes each. Pay attention to not bend any pins.

<br clear=all>

<br clear=all>

[[File:IMG_4195_fixed_wiki.JPG|600px|right]]

[[File:IMG_4195_fixed_wiki.JPG|600px|right]]

'''4.''' Fixate the thermal block to the main board from the backside using the 4 x M2.5 screws.

'''4.''' Fix the thermal block to the main board from the backside using the 4 x M2.5 screws.

{{NoteBox| At this point, you could advance steps 5 & 6. Some people will find more comfortable to plug the SD-card & USB-C adaptors before assembling the main board in the aluminum case. Up to you!}}

{{NoteBox| At this point, you could advance to steps 5 & 6. Some people will find more comfortable to plug the SD-card & USB-C adaptors before assembling the main board in the aluminum case. Up to you!}}

<br clear=all>

<br clear=all>

[[File:IMG_4276_fixed_wiki.JPG|600px|right]]

[[File:IMG_4276_fixed_wiki.JPG|600px|right]]

'''6.''' '''Remove the transparent protective sheet''' from the piece of thermal pad sticked in the thermal block bottom and softly place the main board in the aluminum case bottom. You will find comfortable to grab the thermal block for doing this operation. Fixate it using the 7 x ISO7380 M3 screws.

'''6.''' '''Remove the transparent protective sheet''' from the piece of thermal pad stuck in the thermal block bottom and softly place the main board in the aluminum case bottom. You will find it more comfortable to grab the thermal block to do this operation. Fix it using the 7 x ISO7380 M3 screws.

<br clear=all>

<br clear=all>