Changes

<br clear=all>

<br clear=all>

=='''Step 2: Fixate the display ribbon cable to the RPi4'''==

=='''Step 2: Install the display ribbon cable to the RPi4'''==

<br clear=all>

<br clear=all>

[[File:IMG_4135_fixed_wiki.JPG|600px|right]]

[[File:IMG_4135_fixed_wiki.JPG|600px|right]]

'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, leaving the blue side facing out. When the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one each hand. Put attention to the cable not moving out the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, with the blue side facing out. When the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one of each hand. Pay attention that the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

<br clear=all>

<br clear=all>

{{WarningBox| When possible, use 2 hands to manipulate the fragile FPC connectors. You will control the applied force a lot better than using a single hand. If you couldn't use 2 hands, extreme your precaution. In fact, extreme your precaution all the time when manipulating FPC connectors.}}

{{WarningBox| When possible, use 2 hands to manipulate the fragile FPC connectors. You will control the applied force a lot better than using a single hand. If you couldn't use 2 hands, take extreme care. In fact, extreme care should be taken all the time when manipulating FPC connectors.}}