3,418
edits
Changes
Jump to navigation
Jump to search
Line 437:
Line 437: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→Step 12: Secure the control board, silicone buttons and display to the aluminum case top
=='''Step 12: Secure the control board, silicone buttons and display to the aluminum case top'''==
=='''Step 12: Secure the control board, silicone buttons and display to the aluminum case top'''==
<br clear=all>
[[File:capture000039_fixed_wiki.jpg|600px|right]]
'''1.''' Look for the aluminum case top part.
<br clear=all>
[[File:capture000099_fixed_wiki.jpg|600px|right]]
'''2.''' Look for 8 x DIN7991 M3 screws. They have conic-flat head.
<br clear=all>
[[File:capture000089_fixed_wiki.jpg|600px|right]]
'''3.''' Place the silicone buttons on its place, on top the control board. Note the tiny silicone nipples in the bottom and put attention to get them fit into the small placing-holes on the control board. Once it's done, softly side-push to check the buttons are well sited in its place. They shouldn't move.
<br clear=all>
[[File:capture000094_fixed_wiki.jpg|600px|right]]
'''4.''' Use the "Screens & Bits" case as a mounting stand and place the control board on it, like shown in the picture.
<br clear=all>
[[File:capture000095_fixed_wiki.jpg|600px|right]]
'''5.''' Place the aluminum case top part over the control board taking care of orientation and proceeding slowly. It's a good time to remove the display's protective sheet, or at less,
fold the green tab out of the way so the display make a good fit into the case's window.
<br clear=all>
[[File:capture000101_fixed_wiki.jpg|600px|right]]
'''6.''' Secure the control board with the 8 x M3 conic screws. Again, tight enough, but not too much.
<br clear=all>
[[File:capture000102_fixed_wiki.jpg|600px|right]]
'''7.''' Flip the top part and place it over the cartoon-stand again. Now is the right moment to tight the 4 display screws from step 11 (do you remember?).
<br clear=all>
[[File:capture000103_fixed_wiki.jpg|600px|right]]
'''8.''' Congratulations! We are ready to join everything together.
<br clear=all>
<br clear=all>