Changes

[[File:IMG_4163_fixed_wiki.JPG|600px|right]]

[[File:IMG_4163_fixed_wiki.JPG|600px|right]]

'''6.''' After this, remove the transparent protective sheet from the 3 pieces of thermal pad and fixate the RBPi4 compute module to the thermal block using the 4 x ISO7380 M2.5 screws.

'''6.''' Remove the transparent protective sheet from the 3 pieces of thermal pad and fixate the RBPi4 compute module to the thermal block using the 4 x ISO7380 M2.5 screws.

<br clear=all>

<br clear=all>

[[File:IMG_4188_fixed_wiki.JPG|600px|right]]

[[File:IMG_4188_fixed_wiki.JPG|600px|right]]

'''7.''' Finally, stick the remaining piece of thermal pad (27 x 20 mm) on the contact surface in the external side of the thermal block. That is, on top of the "tower" with 2 tiny holes. Follow the same procedure you already did with the 3 smaller pieces, but don't remove the transparent protective sheet yet.

'''7.''' Finally, stick the remaining piece of thermal pad (27 x 20 mm) on the contact surface in the external side of the thermal block. That is, on top of the "tower" with 2 tiny holes. Follow the same procedure you already did with the 3 smaller pieces, but don't remove the transparent protective sheet yet. You will do later, when installing it in the aluminum case bottom.

<br clear=all>

<br clear=all>