Changes

[[File:IMG_4135_fixed_wiki.JPG|400px|right]]

[[File:IMG_4135_fixed_wiki.JPG|400px|right]]

3. Open the RPi4's DSI connector by pulling softly both sides of the tiny black tongue. When it's totally open, push the ribbon cable inside, leaving the blue side facing out. When you are 100% sure the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one each hand.

3. Open the RPi4's DSI connector by pulling softly both sides of the tiny black tongue. When it's totally open, push the ribbon cable inside, leaving the blue side facing out. When the cable is totally inserted, close the connector by pushing the tongue with 2 fingers, one each hand.

<br clear=all>

<br clear=all>

{{NoteBox| If you break a FPC's connector tongue, you could workaround the problem with thermal glue. Not nice, but it works quite well! }}

{{NoteBox| If you break a FPC's connector tongue, you could workaround the problem with thermal glue. Not nice, but it works quite well! }}

=='''Step 3: Fixating the thermal block'''==

=='''Step 3: Fixating the thermal block'''==