3,451
edits
Changes
Jump to navigation
Jump to search
Line 116:
Line 116: + + + + − + − − [[File:IMG_4142_fixed_wiki.JPG|400px|right]] − Line 131:
Line 132: − + + +
→Step 3: Fixating the thermal block
Having understand all this, you may realize this is a key step for getting you V5 working at 100% of its capacity, so don't be in a hurry and take your time for doing a good work. Let's start!
Having understand all this, you may realize this is a key step for getting you V5 working at 100% of its capacity, so don't be in a hurry and take your time for doing a good work. Let's start!
<br>
--------------
<br>
[[File:IMG_4045_fixed_wiki.JPG|400px|right]]
[[File:IMG_4045_fixed_wiki.JPG|400px|right]]
[[File:IMG_4142_fixed_wiki.JPG|400px|right]]
'''1.''' Look for a piece of thermal pad in the wiring bag, in the "Screen and Bits" case. It is a piece with an approximate size of 60 x 20 mm, gray on one side and blue on the other.
'''1.''' Look for a piece of thermal pad in the wiring bag, in the "Screen and Bits" case. It is a piece with an approximate size of 60 x 20 mm, gray on one side and blue on the other.
<br clear=all>
<br>
'''2.''' Cut 4 little pieces of thermal pad with this recommended sizes:
'''2.''' Cut 4 little pieces of thermal pad with this recommended sizes:
* 6 x 6 mm
* 6 x 6 mm
You could proceed by cutting strips like these:
<br>
You could proceed by cutting 3 strips like these:
<br>
* 27 x 20 mm
* 27 x 20 mm
* 11 x 20 mm => cut this to get 11x11 & 9x11 mm pieces
* 11 x 20 mm => cut this to get 11x11 & 9x11 mm pieces