3,476
edits
Changes
Jump to navigation
Jump to search
no edit summary
Line 1:
Line 1:
−--------------------------------------------------------------
=Previous Requirements=
+='''Previous Requirements'''=
−==BOM V5 kit:==
+=='''BOM V5 kit'''==
* Aluminum Case
* Aluminum Case
* Main Board
* Main Board
Line 17:
Line 17:
* SD-Card (NOT included in V5 kit)
* SD-Card (NOT included in V5 kit)
−==Tools:==
+=='''Tools'''==
* Allen Spanner 1.5 mm
* Allen Spanner 1.5 mm
* Allen Spanner 2.0 mm
* Allen Spanner 2.0 mm
Line 25:
Line 25:
<br clear=all>
<br clear=all>
−=General Advice=
+='''General Advice'''=
* Read & follow carefully the assembling instructions. Don't ignore any guidance or recommendation. We are quite lazy, so we should had some important reason to write it.
* Read & follow carefully the assembling instructions. Don't ignore any guidance or recommendation. We are quite lazy, so we should had some important reason to write it.
Line 39:
Line 39:
* Again! Please, be extremely delicate when manipulating the flat cable connectors (FPC). They are the weakest parts and can be easily broken. Look carefully the photos/videos and proceed just in the way we recommend. Use 2 hands, one finger from each hand. Avoid manipulating the connectors with a single hand or finger. And don't use any tool for this!!
* Again! Please, be extremely delicate when manipulating the flat cable connectors (FPC). They are the weakest parts and can be easily broken. Look carefully the photos/videos and proceed just in the way we recommend. Use 2 hands, one finger from each hand. Avoid manipulating the connectors with a single hand or finger. And don't use any tool for this!!
−=I. BOTTOM PART=
+='''I. BOTTOM PART'''=
=='''Step 0: Dump the screws bag in a apropiate recipient'''==
=='''Step 0: Dump the screws bag in a apropiate recipient'''==
Line 49:
Line 49:
<br clear=all>
<br clear=all>
−='''Step 1: Sticking the rubber feet to the aluminum case bottom'''==
+=='''Step 1: Sticking the rubber feet to the aluminum case bottom'''==
1. Look for the 4 x rubber feet inside the wiring bag, in the "Screen and Bits" case:
1. Look for the 4 x rubber feet inside the wiring bag, in the "Screen and Bits" case:
Line 126:
Line 126:
<br clear=all>
<br clear=all>
−Step 4: Assemble the Main Board into the aluminum case bottom
+=='''Step 4: Assemble the Main Board into the aluminum case bottom'''==
−1. Take the main board from its case:
1. Take the main board from its case:
Line 150:
Line 149:
−=II. TOP PART =
+='''II. TOP PART'''=