505
edits
Changes
Jump to navigation
Jump to search
mLine 367:
Line 367: − +
Building a Zynthian Box using official Kits v4.2-v4.6 (view source)
Revision as of 07:39, 20 May 2022
, 07:39, 20 May 2022Fix typo
[[file:IMG_2490.JPG|600px]]
[[file:IMG_2490.JPG|600px]]
If you don't get an error screen or a blank screen, you probably you made a mistake during the assembly. You have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you get an error screen or a blank screen, you probably made a mistake during the assembly. You will have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you are using the Aruk RC-3 SD image (which you should), you will notice that the controllers are not working at all. This SD image is pre-configured for working with the kit v2, so you need to configure the software for working with the kit v3. The simplest way of doing it is using the webconf tool:
If you are using the Aruk RC-3 SD image (which you should), you will notice that the controllers are not working at all. This SD image is pre-configured for working with the kit v2, so you need to configure the software for working with the kit v3. The simplest way of doing it is using the webconf tool: