3,418
edits
Changes
Jump to navigation
Jump to search
Line 287:
Line 287: − + Line 296:
Line 296: −
Building a Zynthian Box using official Kits v4.2-v4.6 (view source)
Revision as of 00:32, 7 March 2021
, 00:32, 7 March 2021→Connect the ZynAuCon Audio Connectors Board to the Hifiberry DAC+ADC Stage
===Connect the ZynAuCon Audio Connectors Board to the Hifiberry DAC+ADC Stage===
===Connect the ZynAuCon module to the Hifiberry DAC+ADC Stage===
Plug the little 2x10 ribbon cable on the Hifiberry's J1 connector. Next, plug the other end on the ZynAuCon board. Observe that the ribbon cable must be bent forming a 90º angle, so it fits perfectly the space and distance between the 2 IDC connectors.
Plug the little 2x10 ribbon cable on the Hifiberry's J1 connector. Next, plug the other end on the ZynAuCon board. Observe that the ribbon cable must be bent forming a 90º angle, so it fits perfectly the space and distance between the 2 IDC connectors.
[[File:HifiBerryDACADC-Stage-header.jpg|450px]]
[[File:HifiBerryDACADC-Stage-header.jpg|450px]]
===Connect the Display===
===Connect the Display===