3,418
edits
Changes
Jump to navigation
Jump to search
Line 113:
Line 113: − +
Building a Zynthian Box using official Kits v4.2-v4.6 (view source)
Revision as of 00:31, 7 March 2021
, 00:31, 7 March 2021→Secure the ZynAuCon Audio Connectors Board
Let's go!!
Let's go!!
===Secure the ZynAuCon Audio Connectors Board ===
===Secure the ZynAuCon Audio Connector Board ===
The ZynAuCon module improves and simplifies the audio wiring by using a small ribbon cable for driving the 4 balanced channels (2 inputs + 2 outputs) to the 4 high-quality Neutrik TSR case-connectors. For mounting the ZynAuCon, secure the 2 x 15mm separators with 2 x black-anodized bolts M2.5. Next, you have to insert the board from inside the case and secure them with the 4 x nuts from the outside. Use a wrench for tightening the nuts, but not too much, and take care of not damaging the surface of the nice aluminum case!!
The ZynAuCon module improves and simplifies the audio wiring by using a small ribbon cable for driving the 4 balanced channels (2 inputs + 2 outputs) to the 4 high-quality Neutrik TSR case-connectors. For mounting the ZynAuCon, secure the 2 x 15mm separators with 2 x black-anodized bolts M2.5. Next, you have to insert the board from inside the case and secure them with the 4 x nuts from the outside. Use a wrench for tightening the nuts, but not too much, and take care of not damaging the surface of the nice aluminum case!!