Line 6: |
Line 6: |
| [http://shop.zynthian.org Zynthian Shop] | | [http://shop.zynthian.org Zynthian Shop] |
| | | |
− | Specifically, these instructions are for assembling the Zynthian Kit v4.2, that includes the Hifiberry DAC+ADC Stage with the ZynAuCon connector board, the Zynaptik circuit and the ZynScreen v1.5 display. | + | Specifically, these instructions are for assembling Zynthian Kits v4.2, v4.3, v4.4, v4.5 & v4.6, that include: |
| + | |
| + | * ''Hifiberry DAC+ADC Stage'' or ''ZynADAC'' soundcard |
| + | * ZynAuCon connector board |
| + | * Zynaptik-2 or zynaptik-3 module |
| + | * ZynScreen v1.5 display |
| | | |
| [[File:IMG_3148_OK_1024.JPG|500px]][[File:IMG_3145_OK_1024.JPG|500px]] | | [[File:IMG_3148_OK_1024.JPG|500px]][[File:IMG_3145_OK_1024.JPG|500px]] |
| | | |
| =List of Materials= | | =List of Materials= |
− | * [https://shop.zynthian.org/shop/product/zynthian-kit-v4-358?category=13 Zynthian Kit v4] | + | * [https://shop.zynthian.org/shop/product/zynthian-kit-v4-6-448?category=13 Zynthian Kit v4.X] |
| ** [https://www.raspberrypi.org/products/ Raspberry 4 Computing Board] | | ** [https://www.raspberrypi.org/products/ Raspberry 4 Computing Board] |
− | ** [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc-stage/ HifiBerry DAC+ADC STAGE souncard] | + | ** [https://blog.zynthian.org/2021/05/zynadac-v1-0-an-open-hardware-soundcard-for-zynthian/ ZynADAC souncard] or [https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc-stage/ HifiBerry DAC+ADC STAGE souncard] |
− | ** [https://shop.zynthian.org/shop/product/zynaucon-module-v4-2-406?category=16 ZynAuCon Module] (audio connector board) | + | ** [https://shop.zynthian.org/shop/product/zynaucon-module-443?category=16 ZynAuCon Module] (audio connector board) |
| ** [https://shop.zynthian.org/shop/product/zynscreen-v1-5-361?category=16 ZynScreen v1.5] (3.5" touch-display + controllers I/O + rubber silicon button) | | ** [https://shop.zynthian.org/shop/product/zynscreen-v1-5-361?category=16 ZynScreen v1.5] (3.5" touch-display + controllers I/O + rubber silicon button) |
| ** [https://shop.zynthian.org/shop/product/zynthian-controllers-v4-328?category=16 4 x controllers v4] | | ** [https://shop.zynthian.org/shop/product/zynthian-controllers-v4-328?category=16 4 x controllers v4] |
− | ** [https://shop.zynthian.org/shop/product/zynaptik-module-330?category=16 Zynaptic module] (MIDI IN/THRU/OUT & extended I/O) | + | <!--** [https://shop.zynthian.org/shop/product/zynaptik-module-330?category=16 Zynaptic module] (MIDI IN/THRU/OUT & extended I/O)--> |
− | ** [https://shop.zynthian.org/shop/product/aluminum-case-kit-v4-1-333?category=13 Aluminum Case v4] (including zynductor passive cooling, bolts & nuts) | + | ** [https://shop.zynthian.org/shop/product/zynaptik-3-module-446?category=16 Zynaptic module] (MIDI IN/THRU/OUT & extended I/O) |
− | ** [https://shop.zynthian.org/shop/product/zynthian-case-connectors-kit-v4-363?category=16 Pre-built MIDI case-connectors] (with soldered harnesses) | + | ** [https://shop.zynthian.org/shop/product/aluminum-case-kit-v4-1-333?category=16 Aluminum Case v4] (including zynductor passive cooling, bolts & nuts) |
| + | ** [https://shop.zynthian.org/shop/product/midi-case-connectors-v4-366?category=16 Pre-built MIDI case-connectors] (with soldered harnesses) |
| ** [https://shop.zynthian.org/shop/product/zynthian-ribbon-bus-cable-278?category=16 Ribbon bus cable] | | ** [https://shop.zynthian.org/shop/product/zynthian-ribbon-bus-cable-278?category=16 Ribbon bus cable] |
− | * Power supply for RBPi 4 (5.1v 3A with USB type-C connector) => Not included on official kits! | + | ** [https://shop.zynthian.org/shop/product/raspberry-pi-15-3w-usb-c-power-supply-389?category=16 Power supply for RBPi 4] (5V 3A USB type-C connector) => Optional |
− | * 16GB micro-SD card or bigger (Use a high-quality card) => Not included on official kits! | + | ** micro-SD card >16GB (use a good-quality card) => '''Needed but not included''' on official kits! |
| | | |
| =Some definitions= | | =Some definitions= |
Line 78: |
Line 84: |
| ===Zynthian Kit v4=== | | ===Zynthian Kit v4=== |
| | | |
− | A Zynthian Kit is a set of electronic and mechanic parts. The ''official'' Zynthian Kit v4.2 consists of these parts: | + | A Zynthian Kit is a set of electronic and mechanic parts. The ''official'' Zynthian Kit v4.6 consists of these parts: |
| | | |
| + '''1 x Raspberry Pi 4''' | | + '''1 x Raspberry Pi 4''' |
− | + '''1 x Hifiberry DAC+ADC PRO''' | + | + '''1 x ZynADAC Soundcard''' |
| + '''1 x ZynAuCon Module + Mini-ribbon cable''' | | + '''1 x ZynAuCon Module + Mini-ribbon cable''' |
| + '''1 x ZynScreen v1.5:''' Touch-Display 3.5" + Controllers circuit + Silicone buttons | | + '''1 x ZynScreen v1.5:''' Touch-Display 3.5" + Controllers circuit + Silicone buttons |
Line 87: |
Line 93: |
| + '''1 x Zynaptik Module:''' MIDI Ports + extended I/O | | + '''1 x Zynaptik Module:''' MIDI Ports + extended I/O |
| + '''1 x Ribbon bus cable''' | | + '''1 x Ribbon bus cable''' |
− | + '''1 x Zynthian Aluminium Case''' | + | + '''1 x Aluminium Case''' |
− | + '''1 x MIDI Connectors Set + LEDs''' | + | + '''3 x MIDI Connectors with harness + LEDs''' |
| + '''1 x Bolts & Nuts Set''' | | + '''1 x Bolts & Nuts Set''' |
| + '''1 x Zynductor''' | | + '''1 x Zynductor''' |
| | | |
− | [[File:Rbpi4 shop.jpg|330px]][[File:HifiBerryDACADC-Stage-top.jpg|330px]][[File:IMG_2775_OK_shop.JPG|330px]][[File:Controllers_shop.jpeg|330px]][[File:Zynaptik shop.jpeg|330px]][[File:Ribbon_shop.jpeg|330px]][[File:Zynthian_alucase_v41-persp.jpg|330px]][[File:IMG_2887_OK_1024.JPG|400px]][[File:IMG_2887_OK_1024.JPG|400px]][[File:Boltsnuts.JPG|440px]][[File:IMG_2756_OK_shop.JPG|220px]] | + | [[File:Rbpi4 shop.jpg|330px]][[File:HifiBerryDACADC-Stage-top.jpg|330px]][[File:IMG_2775_OK_shop.JPG|330px]][[File:Controllers_shop.jpeg|330px]][[File:Zynaptik shop.jpeg|330px]][[File:Ribbon_shop.jpeg|330px]][[File:Zynthian_alucase_v41-persp.jpg|330px]][[File:ZynAuCon miniribbon.jpg|400px]][[File:IMG_2887_OK_1024.JPG|400px]][[File:Boltsnuts.JPG|440px]][[File:IMG_2756_OK_shop.JPG|220px]] |
| | | |
| ===Unboxing the Zynthian Kit v4=== | | ===Unboxing the Zynthian Kit v4=== |
Line 113: |
Line 119: |
| Let's go!! | | Let's go!! |
| | | |
− | ===Secure the ZynAuCon Audio Connectors Board === | + | ===Secure the ZynAuCon Audio Connector Board === |
| | | |
| The ZynAuCon module improves and simplifies the audio wiring by using a small ribbon cable for driving the 4 balanced channels (2 inputs + 2 outputs) to the 4 high-quality Neutrik TSR case-connectors. For mounting the ZynAuCon, secure the 2 x 15mm separators with 2 x black-anodized bolts M2.5. Next, you have to insert the board from inside the case and secure them with the 4 x nuts from the outside. Use a wrench for tightening the nuts, but not too much, and take care of not damaging the surface of the nice aluminum case!! | | The ZynAuCon module improves and simplifies the audio wiring by using a small ribbon cable for driving the 4 balanced channels (2 inputs + 2 outputs) to the 4 high-quality Neutrik TSR case-connectors. For mounting the ZynAuCon, secure the 2 x 15mm separators with 2 x black-anodized bolts M2.5. Next, you have to insert the board from inside the case and secure them with the 4 x nuts from the outside. Use a wrench for tightening the nuts, but not too much, and take care of not damaging the surface of the nice aluminum case!! |
| | | |
− | [[File:IMG_2886_OK_1024.JPG|400px]] | + | [[File:IMG_3419_fixed.JPG|200px]] |
− | [[File:IMG_2896_OK_1024_fixv41.JPG|400px]] | + | [[File:IMG_3355_fixed.JPG|400px]] |
− | [[File:IMG_2898_OK_1024.JPG|400px]] | + | [[File:IMG_3387_fixed.JPG|400px]] |
| + | |
| + | [[File:IMG_3395_fixed.JPG|400px]] |
| + | [[File:IMG_3401_fixed2.JPG|500px]] |
| + | |
| + | {{NoteBox|In the latest kits (v4.5), the ZynAuCon board includes a mini-jack headphones connector with a volume wheel. Also, the aluminum case has 2 extra holes for securing the ZynAuCon with 2 x M2.5 bolts.}} |
| | | |
| ===Secure the MIDI connectors=== | | ===Secure the MIDI connectors=== |
Line 141: |
Line 152: |
| [[File:IMG_2926_OK_1024.JPG|400px]] | | [[File:IMG_2926_OK_1024.JPG|400px]] |
| | | |
| + | {{WarningBox|Some aluminum cases have the LEDs mounting holes a little bit bigger than it should be. For patching this issue you could use a drop of glue from the inner side.}} |
| | | |
| When it's done, you have to plug the LED wires into the 2 spare "DUPONT" connectors from the MIDI harness (green & yellow wires). Polarity is important, so don't cross the wires: | | When it's done, you have to plug the LED wires into the 2 spare "DUPONT" connectors from the MIDI harness (green & yellow wires). Polarity is important, so don't cross the wires: |
Line 207: |
Line 219: |
| | | |
| | | |
− | {{NoteBox|The Hifiberry DAC+ADC Stage may include some nylon spacers and bolts. You can choose to use these instead of the metal ones included with the Zynthian kit. }} | + | {{NoteBox|Note that the "Hifiberry DAC+ADC Stage", included in the 4.1, 4.2 & 4.3 kits, and the "ZynADAC", included in the 4.4 kit, have no RCA connectors. Photos may show an older model, but these instructions are accurate for 4.1 to 4.4 kits. }} |
− | | |
− | {{NoteBox|Note that the Hifiberry DAC+ADC Stage included in the 4.1 kit has no RCA connectors. Photos may show an older model, but these instructions are accurate for V4.1. }}
| |
| | | |
| ===Secure the Zynaptik module=== | | ===Secure the Zynaptik module=== |
Line 287: |
Line 297: |
| | | |
| | | |
− | ===Connect the ZynAuCon Audio Connectors Board to the Hifiberry DAC+ADC Stage=== | + | ===Connect the ZynAuCon module to the Hifiberry DAC+ADC Stage=== |
| | | |
| Plug the little 2x10 ribbon cable on the Hifiberry's J1 connector. Next, plug the other end on the ZynAuCon board. Observe that the ribbon cable must be bent forming a 90º angle, so it fits perfectly the space and distance between the 2 IDC connectors. | | Plug the little 2x10 ribbon cable on the Hifiberry's J1 connector. Next, plug the other end on the ZynAuCon board. Observe that the ribbon cable must be bent forming a 90º angle, so it fits perfectly the space and distance between the 2 IDC connectors. |
| | | |
− | [[File:HifiBerryDACADC-Stage-connection-OUT.png|600px]] | + | |
| + | [[File:IMG_3410_fixed.JPG|600px]] |
| + | |
| | | |
| FYI, this is the specification for the 10-pin header (J1) on the Hifiberry DAC+ADC Stage: | | FYI, this is the specification for the 10-pin header (J1) on the Hifiberry DAC+ADC Stage: |
| | | |
| [[File:HifiBerryDACADC-Stage-header.jpg|450px]] | | [[File:HifiBerryDACADC-Stage-header.jpg|450px]] |
− |
| |
| | | |
| ===Connect the Display=== | | ===Connect the Display=== |
Line 311: |
Line 322: |
| | | |
| '''And that's all!!''' Your Zynthian Box is almost ready to boot. I recommend that you double-check everything before powering up the device. | | '''And that's all!!''' Your Zynthian Box is almost ready to boot. I recommend that you double-check everything before powering up the device. |
| + | |
| + | =Close the case= |
| + | |
| + | Once everything is in its place and you have tested that it works, it's time to close the case |
| + | |
| + | Take your time to bend and push the cables to get a good fit when closing the case. The ribbon bus cable is pre-bent to make this process easier. |
| + | |
| + | |
| + | [[File:IMG_3126_OK_1024.JPG|600px]] |
| + | |
| + | {{WarningBox| If you have a v4.5 kit or higher, you should take extra care for getting the mini-jack headphones connector and the volume wheel to fit into their places. Put special attention to not forcing the volume wheel when opening or closing the case! }} |
| + | |
| + | Finally, fasten the 8 self-taping bolts to secure the case, 4 on each side. |
| + | |
| + | |
| + | [[File:IMG_3148_OK_1024.JPG|800px]] |
| + | |
| + | {{NoteBox| Be careful not to over-tighten the case screws, as it can buckle the top plate. If you notice the top place bowing slightly, loosen the screws a little until the surface is level. }} |
| | | |
| =Testing your Zynthian Box= | | =Testing your Zynthian Box= |
Line 438: |
Line 467: |
| | | |
| If this doesn't work, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]]. | | If this doesn't work, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]]. |
− |
| |
− | =Final steps=
| |
− |
| |
− | Once everything is in its place and you have tested that it works, it's time to close the case
| |
− |
| |
− |
| |
− | ===Close the case===
| |
− |
| |
− | Take your time to bend and push the cables to get a good fit when closing the case. The ribbon bus cable is pre-bent to make this process easier.
| |
− |
| |
− |
| |
− | [[File:IMG_3126_OK_1024.JPG|600px]]
| |
− |
| |
− |
| |
− | Finally, fasten the 8 sheet-threaded bolts to secure the case, 4 on each side.
| |
− |
| |
− |
| |
− | [[File:IMG_3148_OK_1024.JPG|800px]]
| |
− |
| |
− | {{NoteBox| Be careful not to over-tighten the case screws, as it can buckle the top plate. If you notice the top place bowing slightly, loosen the screws a little until the surface is level. }}
| |
− |
| |
| | | |
| =Update your Zynthian Box= | | =Update your Zynthian Box= |