Page history
9 September 2024
21 August 2024
16 July 2024
14 December 2023
16 September 2023
→Attach and secure the knobs
+2
→Close the aluminum case
+2
→Attach and secure the knobs
+142
→Close the aluminum case
+142
→Attach and secure the knobs
→Close the aluminum case
+25
→Attach and secure the knobs
+6
→Attach and secure the knobs
+3
→Attach and secure the knobs
+544
→Close the aluminum case
→Close the aluminum case
+545
→Close the aluminum case
+164
→Attach and secure the knobs
+202
→Close the aluminum case
+354
10 September 2023
→Plug the flat ribbon cable into the control board
+145
→Install the display ribbon cable to the RPi4
+142
2 September 2023
12 August 2023
11 August 2023
16 July 2023
13 July 2023
11 July 2023
→BOM V5 kit
+10
→Dump the screws bag in an suitable receptacle
+68
→Dump the screws bag in an suitable receptacle
+475
→BOM V5 kit
+102
→JOINING BOTH PARTS AND CLOSING THE CASE
+179
→Assemble the Main Board into the aluminum case bottom
+42
→Assemble the Main Board into the aluminum case bottom
+46
→Assemble the Main Board into the aluminum case bottom
+96
→Assemble the display on the control board
-3
→Assemble the display on the control board
+3
→Assemble the display on the control board
+279
→Stick the SD-card holder cover
+16
→Stick the SD-card holder cover
-11
→Stick the SD-card holder cover
+282
→Assemble the Main Board into the aluminum case bottom
+50
→Secure the control board, silicone buttons and display to the aluminum case top
+48
→TOP PART
-35
→Assemble the Main Board into the aluminum case bottom
+9
→BOM V5 kit
→JOINING BOTH PARTS AND CLOSING THE CASE
-36