Difference between revisions of "Zynthian Updating"

From ZynthianWiki
Jump to navigation Jump to search
 
(12 intermediate revisions by 4 users not shown)
Line 1: Line 1:
RBPi2 is not longer supported by the latest zynthian SD images, so you need a RBPi3 or rebuild your own SD image.
+
===Important notice===
  
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software. You can do it easily from the Zynthian's UI:
+
Zynthian runs on top of a basic Debian Linux system. It is not recommanded at all to do the traditional "apt-get update&apt-get upgrade" commands: this could break your Zynthian system.
  
* Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
+
'''You have been warned !!!'''  
* Click '''update software''' from the UI's Admin Menu
 
* Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
 
  
You can also do it from the command line using this command:
 
  
   /zynthian/zynthian-sys/scripts/update_zynthian.sh
+
If you are using an official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box is update the software.
 +
 
 +
===Updating from the UI===
 +
 
 +
If your Zynthian's UI is working OK and you can control the interface using the knobs or the touch screen, you can update your software very easily:
 +
 
 +
# Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. Alternately, you can configure the WIFI connection using the Webconf tool.
 +
# Click '''update software''' from the UI's Admin Menu
 +
# Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
 +
 
 +
===Updating from the Browser (webconf)===
 +
 
 +
You can also update your zynthian from your browser, using the Webconf tool at this address:
 +
 
 +
   http://zynthian.local
 +
 
 +
  http://zynthian.lan
 +
 
 +
or
 +
 
 +
  http://#ZYNTHIAN_IP#
 +
 
 +
===Updating from the CLI===
 +
 
 +
Finally, you can update from the command line, using this command:
 +
 
 +
  update_zynthian.sh
  
 
If you don't know how to access your zynthian using the command line, read this:
 
If you don't know how to access your zynthian using the command line, read this:
  
* [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]
+
  [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]

Latest revision as of 18:40, 22 June 2023

1 Important notice

Zynthian runs on top of a basic Debian Linux system. It is not recommanded at all to do the traditional "apt-get update&apt-get upgrade" commands: this could break your Zynthian system.

You have been warned !!!


If you are using an official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box is update the software.

2 Updating from the UI

If your Zynthian's UI is working OK and you can control the interface using the knobs or the touch screen, you can update your software very easily:

  1. Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. Alternately, you can configure the WIFI connection using the Webconf tool.
  2. Click update software from the UI's Admin Menu
  3. Click restart UI (or reboot) from the UI's Admin Menu

3 Updating from the Browser (webconf)

You can also update your zynthian from your browser, using the Webconf tool at this address:

 http://zynthian.local
 http://zynthian.lan

or

 http://#ZYNTHIAN_IP#

4 Updating from the CLI

Finally, you can update from the command line, using this command:

 update_zynthian.sh

If you don't know how to access your zynthian using the command line, read this:

 Accessing Zynthian from other devices