Difference between revisions of "Zynthian Box Updating"

From ZynthianWiki
Jump to: navigation, search
 
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software. You can do it easily from the Zynthian's UI:
+
If you are using an official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box is update the software.  
  
* Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
+
===Updating from the UI===
* Click '''update software''' from the UI's Admin Menu
+
* Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
+
  
You can also do it from the command line using this command:
+
If your Zynthian's UI is working OK and you can control the interface using the knobs or the touch screen, you can update your software very easily:
  
  /zynthian/zynthian-sys/scripts/update_zynthian.sh
+
# Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. Alternately, you can configure the WIFI connection using the Webconf tool.
 +
# Click '''update software''' from the UI's Admin Menu
 +
# Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
 +
 
 +
===Updating from the Browser (webconf)===
 +
 
 +
You can also update your zynthian from your browser, using the Webconf tool at this address:
 +
 
 +
  http://zynthian.local
 +
 
 +
or
 +
 
 +
  http://#ZYNTHIAN_IP#
 +
 
 +
===Updating from the CLI===
 +
 
 +
Finally, you can update from the command line, using this command:
 +
 
 +
  update_zynthian.sh
  
 
If you don't know how to access your zynthian using the command line, read this:
 
If you don't know how to access your zynthian using the command line, read this:
  
* [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]
+
  [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]

Latest revision as of 03:22, 7 April 2020

If you are using an official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box is update the software.

Updating from the UI

If your Zynthian's UI is working OK and you can control the interface using the knobs or the touch screen, you can update your software very easily:

  1. Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. Alternately, you can configure the WIFI connection using the Webconf tool.
  2. Click update software from the UI's Admin Menu
  3. Click restart UI (or reboot) from the UI's Admin Menu

Updating from the Browser (webconf)

You can also update your zynthian from your browser, using the Webconf tool at this address:

 http://zynthian.local

or

 http://#ZYNTHIAN_IP#

Updating from the CLI

Finally, you can update from the command line, using this command:

 update_zynthian.sh

If you don't know how to access your zynthian using the command line, read this:

 Accessing Zynthian from other devices