Difference between revisions of "Unofficial hardware"

From ZynthianWiki
Jump to navigation Jump to search
Line 1: Line 1:
 
=Displays=
 
=Displays=
  
* Adafruit PiTFT Touchscreen 2.8" https://www.adafruit.com/category/804 (Clonic versions too!)
+
* [https://www.adafruit.com/product/1601 Adafruit PiTFT Touchscreen 2.8"]
* OzzMaker PiScreen 2
+
* [https://es.aliexpress.com/store/product/2-8-TFT-LCD-expansion-display-touchscreen-for-Raspberry-Pi-B-B-Board/1679052_32710026340.html PiTFT Clonic versions]
* WaveShare TouchScreens with GPIO connection for touch-device
+
* [http://ozzmaker.com/product/piscreen-3-5-tft-with-touch-for-the-raspberry-pi/ OzzMaker PiScreen 2]
* Official Raspberry Pi Foundation 7" TouchScreen
+
* [http://www.waveshare.com/product/mini-pc/raspberry-pi/displays.htm WaveShare Displays with GPIO touch-device]
 +
* Official Raspberry Pi Foundation 7" Display
 
** https://www.raspberrypi.org/products/raspberry-pi-touch-display/
 
** https://www.raspberrypi.org/products/raspberry-pi-touch-display/
 
** USA https://www.mcmelectronics.com/product/83-16872
 
** USA https://www.mcmelectronics.com/product/83-16872
* Generic HDMI Touchscreens with USB mouse-like-touch-device
+
* Generic HDMI Displays with USB mouse-like touch-device
  
 
=Audio interfaces=
 
=Audio interfaces=
 +
 
==Tested good==
 
==Tested good==
  

Revision as of 23:44, 28 August 2017

Displays

Audio interfaces

Tested good

Tested bad

  • Built-in Raspberry 1/8" audio jack. The onboard RBPi soundcard is not suitable at all. It's PWM based (no DAC!) and only 10 bits of resolution. Also, it has a huge latency. Forget getting a decent result with it. You have to use a decent soundcard (with a DAC!) for RBPi.
  • USB audio interfaces (latency problems)

Untested